Product Description:

No 0414 755 015 24V Diesel Fuel Pumps

Details of product:

EUP 1004 Technical Parameters:

Plunger diameter: 10 mm

Plunger stroke: 18 mm

Operating voltage of solenoid: DC 24 V

Camshaft top speed limited: 1300 r/m

Peak pressure of top mouth calibrated: ≥180 MPa

Operating temperature of pump: -30°C~120°C

Matching scope of single cylinder power: 30~60 KW

Applied motor type: For E series motors, Mack E 350 series, DETUZ, Renault

Emission target: Euro 3, Euro 4

Sample and mass procedure time:

1. Sample time: within 3 days

2. Mass production time: According to the order quantities, Normal about 30days after sample

and order confirmed

Packing:

1. Packing: 1 pc/white box, 6 pcs/wooden case

2. Wooden case size: 36.5*26.8*27.8 cm

Customers' requests on packing are also accepted.

Delivery:

1.Delivery terms: 3-30days

2. Delivery Method: By Sea/Air/DHL/Fedex/UPS/TNT

Payment:

1. Payment method: T/T, L/C

2. T/T:30% Deposit Before Production, rest 70% before shipment

Service:

1. Our company will offer following services to our customers: If products have quality problems in three months after selling to customers, there is unconditional replacement for customers; one-year warranty period.

2. After-saled service is offered. We keep a close following-up after goods are sold and shipped to our customers. Feebacks, comments and suggestions are welcome.

Company information:

1. Technical patent certificates

*Cooperative partner for technology suport---Tsinghua University

As one of the top ranking university in China, Tsinghua University is the first organization that engages in the diesel engine electronic injection system R&D with several industry leaders.The Company had signed relevant technology---since it established, and cooprated in product development, technology achievements transfer and talents training. Basing on the deep coopration, the Company has achieved several technology achievements. The Company has obtained several patents.

2. Quality Management

Quality Policy: Foucus on Customers Attention to Details

Staff Participation Constant Improvement

Implement ISO/TS 16949: 2009 Quality Management System

The Company has world-ranking experimental and testing equipments in the laboratory and measuring room. Its production goes through strict quality control. Products are fully tested by equipments to make sure that all the products meet the factory and customers' requirements.

3.Global Market

Focus on the global market spread (such as North and South America, Middle East, Europe and Africa) while developing and consolidating the domestic market.

4. Manufacture and Technology

Advanced technology standard; Top-ranking processing equipment;

Advanced flexible manufacturing system; Efficient production organization;

Flexible manufacturing system to meet different requirements; Advanced technology for macthing parts' process, such as match-grind and match-honing.

5. Varities of product for worldwide service

According to different diesel engine manufacture's requirement, the Company can provide a whole set system for diesel engine electronic injection ECU, sensors, wire harness and other mechanical parts. Moreover, the Company can provide technical support to electronic control transfer of diesel engine to meet the Euro 3, Euro 4 emission standard.

EUP

Our Electronic Unit Pump (as EUP for short) has passed the endurance test of 2000 hours, and can compare with other famous companies' products in the world, like its functional performance meeting Bosch or Delph's requirements. The EUP can apply to the widely used diesel engines that fixed plug-type EUP. Used for: Four-cylinder motor with 160~190 HP or six-cylinder motor with 240~300 HP, medium and high duty truck, passenger bus, specialty vehicle, engineering machinery and generator set.

ECU

Fuction: starting control, idle control, speed control, max rotational-speed control, timing injection control, air-fuel ratio control, etc.

Electronic Injector & Nozzle

Sensor & Wire harness

For vehicle using: Temperature and Pressure Sensor, Temperature Sensor, Pressure Sensor, Crankshaft Rotational-speed Sensor, Camshaft Rotational-speed Sensor, etc.

High-pressure Comman Rail System

We have already advanced to the research of the next generation product of high-pressure common rail system, and worked out the injector assembly fundamental design scheme and the corresponding technical process design by measuring, drawing and analyzing foreign systems and large amount of simulation. And we have also finished the 3.0 generation ECU platform based on MPC561 chip, which is designed to meet the requirements of high-pressure common rail system and the National IV emission standard.

FAQ:

1. How to ship?

By sea :Ningbo/Shanghai port →your nearest port

By air :Ningbo/Shanghai airport → your nearest airport

By express:DHL,UPS,FEDEX,TNT.

2. How to contact us?

Nanchang Jiangxi Zhifang Numerical Control Power Co.,LTD.

Add: No.635 in the Xiaolan middle avenue, Xiaolan Economic Development Zone, Nanchang,Jiangxi, China

Tel:86-791-85775885

Fax:86-791-85775005

Website:http://www.jxzfsk.com

http://jxzfsk.en.alibaba.com