DX-201 electromagnetic flowmeter/magnetic flux meter/electromagnetic flow meter Technical parameters of DX-201 magnetic flux meter:

1. Power Supply:	AC 220V/0.5A;
2. Test range:	2.000mWb, 20.00mWb two gears;
3. The accuracy of testing DC magnetic field:	Better than 1.0% (corresponding to the full scale per gear);
4. The magnetic field minimum resolution:	1uWb;
5. Dimension:	250mm × 180mm × 100mm,
6. weight:	1.2kg;
7. Operational environment:	0 ° C to +50 ° C,
8. Humidity:	35 to 80%.

DX-201 digital fluxmeter is a precise magnetic measuring instrument, adopted low drift electronic integrator design and production. The most important features are test response quick, without data lose in the testing process. In the process of test samples flux by the Czochralski method, fast pull and slow pull datas are consistent, fine features especially shows in repeated measurements and regression testing. It can measure magnetic flux or magnetic moment matched with different fixtures according to users’ requirements.

Wide application of DX-201 Flux meter:

The quality management of magnet, the magnet inside the magnetic circuit saturation, as well as the measurement of multipole magnet total magnetic flux

Features:

It adopts a high input impedance circuit design, affected by the test coil resistance is very small to ensure test accuracy.

DX-210B electromagnetic flowmeter/magnetic flux meter/electromagnetic flow meter

Introduction

DX-210B digital fluxmeter is a precise magnetic measuring instrument, adopted low drift electronic integrator. The most important features are test response quick, without data lose in the testing process, high test accuracy and low drift. In the process of test samples flux by the Czochralski method, fast pull and slow pull datas are consistent, fine features especially shows in repeated measurements and regression testing. It can measure magnetic flux or magnetic moment matched with different fixtures according to users’ requirements.

Widly applications:

1. Measurement of the quality management of magnet;

2. Measurement of magnet saturation state in magnetic circuit;

3. Measurement of multipole magnet total magnetic flux.

Features:

1. Directly read magnetic flux data;

2. Judge the direction of integration by “+” or “-”;

3. Suitable for being matched with different integration coils;

4. Adjust stably, low drift, less than 1uWb/min;

5. High input inpedance, coil has small effect on test result.

Technical parameters of DX-210B magnetic flux meter:

1. Power Supply:	AC 220V/0.5A;
2. Test range:	2mWb, 20mWb, 200mWb, 2000mWb four gears;
3. Test accuracy :	Better than 0.5% (corresponding to the each full scale);
4. Minimum resolution:	0.1uWb (corresponding to 2mWb range);
5. Dimension:	285mm × 300mm × 100mm,
6. weight:	3kg;
7. Operational temperature:	0 ° C to +50 ° C,
8. Humidity:	35 to 80%.

More Pictures of DX flux meter:

DX-201 Boiler Tube Oxide Scale Nondestructive Tester

DX-210B Fluxmeter

DX-201 Flux Meter

More additional informations, we are ready to give you!