Product Description

GD-265D-1 Petroleum Products Kinematic Viscosity Meter

1.Introduction

GD-265D-1 Petroleum Products Kinematic Viscosity Meter is designed and made as per the industry standard of People’s Republic of China SY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester, GB/T 265 Petroleum products-Determination of kinematic viscosity and calculation of dynamic viscosity and ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.

GD-265D-1 Petroleum Products Kinematic Viscosity Meter is suitable to determine kinematic viscosity of liquid petroleum products (Newtonian liquids) by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer at a constant temperature.

2. Technical Parameters

No.	Name	Parameters	Remark
1	Power Supply	AC 220V±10%, 50Hz
2	Auxiliary Heating	1000W
3	Temperature Power	650W
4	Stirring Motor	6W, 1200RMP.
5	Temperature Range	room temp.~100°c
6	Temperature Control Accuracy	±0.01°c
7	Water Bath	20L	tow layers
8	Ambient Temperature	-10°c~35°c
9	Relative Humidity	≤85%
10	Timing Device	0.1s~999.9s	resolution: 0.1s
11	Capillary Viscomete Tube	7 pcs

3.Accessories

No.	Name	Unit	Qty
1	GD-265D-1 petroleum product kinematic viscosity tester(including glass jars, stirring device and rubber bound)	Set	1
2	Capillary viscometer(Total 7 pieces)	Group	1
3	Mercury thermometer 0~50 °C; 50~100 °C; scale values are both 0.1 °C)	pc	1 for each
4	Plummet	pc	1
5	Sensor	pc	1
6	Sensor Connector	pc	1
7	Power Supply Wire (250 V 10 A)	pc	1
8	Cover	pc	4
9	Capillary Clamp	Group	4
10	Silica Gel Stopper	pc	2
11	Fuse 15 A (Φ5×20)	pc	2
12	Rounded Glass	pc	1
13	Stopping ring for Thermometer (1#)	pc	4

Packaging & Shipping

Our Services

Company Information