Specifications

Reverse osmosis system
1.automatically wash RO membraines
2.filter cartridge:quartz sand and activated carbon

How a Reverse Osmosis System Works?

Prefiltration: When water first enters the RO system, it flows through a prefilter that protects the automatic shut-off and the membrane from clogging with debris. The job of the prefilter is to filter out larger particles such as silt, rust or scale, extending the life of your R.O. membrane and allowing it to tackle the smaller contaminants.
Reverse osmosis system
In a higher output T.F.C unit, the prefilter also has activated carbon in it. Not only does the porous activated carbon remove chlorine particles, (which is necessary to protect the refined T.F.C. membrane), it serves to filter out other contaminants as well.

The Membrane: Water then travels to the operational center of the system - the membrane. Here, most particles too small to be trapped by the prefilter are removed from the water stream and rinsed to the drain.

The membrane's microscopic pores allow Hydrogen and Oxygen molecules through, (and water is H2O). The majority of the dissolved solids and other contaminants are flushed into the drain's water stream and exit the system.

The "Final Polish": After the membrane, the R.O. water is routed to the holding tank. The automatic shut-off tells the system when it's time to make more water. When you turn on the faucet and draw water from the holding tank, it then goes through its final stage of filtration, a carbon filter, to remove any remaining tastes and odors before reaching your glass. This adds a "Final Polish" to your water.

Standard Reverse Osmosis System

Our Standard reverse osmosis unit is a reliable and affordable system for good clean drinking water. With a 2 gallon storage tank, it is a perfect fit for smaller households.

Features...

Patented Design: Exclusive manifold plate with patented channel design reduces tubing connections and simplifies installation.Compact System: Space-saving design is ideal for under-sink installations and uses minimal space.High Capacity Tank: Holds approximately 2 gallons of water without taking up much space.Automatic Shut-Off: Signals the system to stop making water until more is needed.Production: 10 gallons per dayHow a Water Softener Works?

The performance of a water softener is dependent on two key components; a resin bed that cleans the water and precision equipment that cleans the resin. The two most significant elements that differentiate one softener from another is the volume of resin and the type of control valve.

The resin tank: contains media called resin. The resin attracts and collects minerals from hard water. Once the resin is saturated with hardness minerals it must be cleaned and regenerated. Once regenerated, the resin is ready to remove more minerals from the water.

The control valve: routes the water flow through the system and controls the operating cycle. Hard water passes through the resin bed to become soft. During regeneration, water flow is reversed to clean the resin bed. Brine is pulled in and then rinsed out to regenerate the resin, preparing it to soften more water. The brine tank is then refilled with fresh water for future cycles.

The brine tank: stores salt and water to make brine which is used for regenerating the resin. Resin can be regenerated with sodium from salt or potassium from potassium chloride.

WATER SOFTENING, FILTRATION, REVERSE OSMOSIS, DEIONIZATION, HIGH PURITY SYSTEMS

For over 45 years, Our Systems has been providing high quality water treatment products. Our broad range of experience allows us to support and tailor various commercial and industrial water treatment applications to fit customer specific needs. Aqua Systems maintains a total commitment to the water quality treatment industry featuring quality products and a staff of experienced professionals.

WATER SOFTENINGComplete pre-engineered systems with 3/4", 1", 1.5", 2" & 3" valvesCustom tailored systems through 6" valvesSingle and multi-tank systemsFiberglass and Steel tanksMetal and non-metal valve and piped systemsSystem retrofits, repair parts, upgrades, controls, and valves

Features:

The system uses mechanical filter & active carbon as pre-filtration, which will effectively remove the suspend

substance, sand particle, organic colloid, organic colloid, organic compound, odor and odd Cl2 etc; And a softener

will be used to exchange the Ca or Mg hydronium from the water; Finally the RO membrane will act as pre-

desalination filter, to remove large majority of dissolved salt, bacterium etc; and use ozone sterilization system and

ozone fresh keeper to assure the water quality to reach our water requirement.

Reverse osmosis system

Commercial RO Water Filtration System
Item	Description	Quantity	Remark
Tap Water Tank	2 m³	1 PC	Supplied by clients
Input valve	ND20	1 PC	SUS304 Stainless Steel
5um filter	20"	2 pcs	Including 5 pcs filter
Booster pump	20"×1 .S.S 304	1pcs	220V/50HZ,power:0.72KW
Mechanical Filter	1080X600	1 PC	Fiber glass
Active Carbon Filter	1080X600	1 PC	Fiber glass
Security Filter	10us	5 SETS
Re-generator valve	ND25	2 PC	SUS304 Stainless Steel
High Pressure Pump	BLC70/100,CDL2-180	2PC	SUS304 Stainless Steel
RO Membrane	BW30HRLE-4040	3 PCS
Pressure Container	4040 x 2m	3 Sets	SUS304 Stainless Steel
Flux Meter	35GPM	2 PCS
Pipes	High pressure: SUS304; Low pressure: PVC-U		PVC-U, SUS304
Electric Ball Valve	DN40 DN50	1 PC for each
Operation Panel		1 SET	SUS304 Stainless Steel
Body Frame		1 PC	SUS304 Stainless Steel
Electricity Conduction Rate Meter	CM230	2PCS
Meter	1MPa, 2.5Mpa	2 PCS for each
Pressure Control Valve	DN25, DN20	1 PC for each
0.22UM filter	ABS	3pcs	20"×1
Pure water tank	1T	1pcs	S.S 304 supply by customer