Swing barrier gate, barrier gate, automatic barrier gate, optical barrier gate, swing gate, swing automatic gate, swing gate manufacture, barrier gate manufacture

Our barrier gate(DB318):

1.Production photo

2.Technical Data for barrier gate (DB318)

3.Metrial Processing

4.Pure Manual Welding

5.Pure Manual finishing

6.Fixed Acrylic

7.Driver control board

1). The PCB board is developed by our company.

2). The PCB board be processed by listed company .

8.Testing

1). Check the wiring

When connected power debugging, please check the wiring diagram according to each parts of the line is connected.

Note: protective earth wire of equipment must reliable grounding, otherwise don't allow debugging.

2). Function test

(1) Turnstile actually pick two way signal (come in and out ).

(2) if the installation has LED indicator light on the surface, if the control PCB board receive the legitimate signal , turnstile will have green arrows in the direction.

9.Package and Delivery

10.Warnings

Before starting installation, you must pay attention to those notes:

1.Before starting installation and operation or maintenance, cut off power supply.

2.The product must be earthed, and an earth leakage breaker is necessary on the power supply.

3.Do not change the original inside wiring.

4.Keep the automatic control (push-button , remote control , etc) out of the reach of children .The control system must be installed at a minimum height of 1.5mm the ground surface.

5.Never open the door or the cover of the cabinet when the machine is working .

11.Maintance

1.It is forbidden for those non-specialists to open the cabinet to carry out adjustment, maintenance and service of the product.

2.The housing of the equipment is of a sub-polish stainless steel. It is required to clean regularly with soft cloth so as to keep a clean and polish surface. It is forbidden to clean the surface with a hard object, otherwise, the good looking appearance may be affected. It is also forbidden to wash it with water, otherwise, short circuit may occur in the electric control system and the equipment may be damaged.

3.It is required to check regularly the connection of various movement sections of the equipment to avoid loosen fasteners, otherwise, turnstile failure may be resulted due to long term operation.

4.It is required to apply lubricant regularly to the movement sections.

5.It is required to check regularly the connection socket and connectors of the lines to ensure a reliable connection.

6.It is required to check regularly the protection grounding of the system to ensure a reliable connection.

7.It is required to recover the protection housing of the circuit and close properly the cabinet door after checking and maintaining properly the product.

12.Guaranty regulations

The guaranty service regulations as follow:

1.One year free guaranty service

2.Three years”maintenance service with bottom cost

3.Technical support for maintenance by telephone ,email, on-line etc all the life

The guaranty time is valid from the delivery; the guaranty service ranges from the quality problem ,service is only for the product itself ;

the guaranty for the product of other costs are caused by users themselves;

13.Certification

14.Project Case

15.Factory tour of the barrier gate

16.About us

Thank you very muck for your view !

Any questions, that will be appreciated !

Tel:86-755-29010765

Fax:86-755-29164103

Mobile:86-18802688420

Swing barrier gate, barrier gate, automatic barrier gate, optical barrier gate, swing gate, swing automatic gate, swing gate manufacture, barrier gate manufacture