House Security CO Detector Alarm with Self Test Function —HD2000C Series

Product Information:HD2000C is a new standalone AC powered plug-in carbon monoxide gas detector from Henan Chicheng Electric Co.,Ltd to protect you and others from the dangers of carbon monoxide. It adopts highly accurate electro-chemical CO sensor and utilizes sophisticated electronic components, offering a high level of functionality, reliability and flexibility.

HD1000C is complete with a special circuit that control the electro-chemical CO sensor’s efficiency level, and signals any possible fault and it has power, warm up, fault and alarm indications, as well as a control button for test(press) and rest (press and hold for more than 5 seconds).

HD1000Cseries detectors is calibrated to 30ppm/50ppm or as the customers requirement, and it can activate solenoid valves, sirens and any other signal or alarm handling device if any, by means of the built in relay.

Application:HD2000C Detector is optimized for use by professionals with carbon monoxide leak detection and it is ideally suited for use in private or social housing, such as bedrooms, hotels, hospitals and even dormitory rooms where the carbon monoxide pose a substantial hazard if a leak occurs.

Features & Benefits

High reliability—Electro-chemical CO sensor

--professional low profile design

--With special circuit(MCU processing control and SMT manufacture Technology).

-- Comply to GB15322.5-2003.

Easy to Install---Unit plugs directly into any wall outlet.

Easy operation—Clearly visible status indications LEDS (power, preheat, fault and alarm).

-- Button for test and rest: Test the alarm electronics and reset the unit during alarm.

--Loud 85dB at 1m

Low total cost—Ideal for easy installation

--Direct connection to a solenoid valve

--5 years working life with 2 year guarantee.

Designed for residential environments—Slim,small, compact design with stylish features, ideal for residential setting and modern decorations.

Technical Specifications:

Model: HD2000C

Detecting principle: Electro-chemical CO sensor

Calibration gas: Carbon monoxide

Alarm level: 50ppm

Accuracy:+/-3%LEL

Audible alarm level: 85dB at 1m

Visual indicator: Green LED indicates receiving electric power and operating properly.

Yellow LED above Power LED illuminates in the warming up mode.

Yellow LED below Red LED is fault LED means the gas detection sensor or circuit is not working efficiently and must be replaced by an authorized service center.

Red LED illuminates when in alarm mode.

Button: For test units electronic circuit and horn and rests the units during alarm.

Operating environment:

Power supply:110V-230VAC 50/60Hz.

Power consumption:

Temperature: -10°C~+55°C

Humidity: ≤95%RH (no condensation)

Size: 118mm (L)×78mm(W) ×38mm(H)/ (4.6’’)L*3.1W’’*1.5’’H.

Net Weight: 330g

Wiring:plug-in

Lifetime/Warranty: 5years/ 2 years.