Brief Introduction to 2014 Design High Profit Tyre Recycling to Oil Pyrolysis Machine

1. Machine models:

2. Safety:

1. We using auto welding machine to make the reactor, which can guarantee the quality of welding seam, avoid cracking and has a long life for about 8 years.

2. Water sealing system to prevent oil gas back to reactor causing accident.

3. Professional thermometer, professional pressure gauge and safety valve.

3. Environment friendly:

1. Dedusting system to prevent gas and dust from coal burning

2. The exhaust gas will be recycled for heating reactor, no gas pollution.

3. Well sealing on every junction parts to prevent gas leak, no smells.

4. Longer life:

Use Q345R special steel plate, welding seam. The life will be more than 8 years.

5. Energy saving:

1. Well sealing for heating system, no gas leak and saving fuel.

2. The exhaust gas will be recycled for reactor heating.

6. The machine covers area.

The machine itself cover 300 square meters (length 20M, Width 15M). Add raw material stay, carbon black stay, big oil tank zone, workers rest room and simple office. It takes at least 600-800 square meters.

7. The oil yield rate

8. Product Feature

» 100% waste tyre recycling is achieved

» No chemical ingredients are used in process (environment friendly).

» During and after the process; no soil, water or air pollution is observed.

» Creates economically valuable products out of waste (all of the products are industrial raw materials that have a market value).

» The most cost-effective waste tyre recycling technology in the world

» Raw material (waste tyre) is cheap and easy to provide. These are the by-products of tyre production.

» The process can be applied to all rubber based materials.

» The system creates an alternative source of energy to replace petroleum products and natural gas.

» System gives the opportunity to governments and local administrations to deal with the waste tyre problem to a great extent.

» System prevents the spread of diseases caused by waste tyres.

» We supply plants with capacities of 5 ton /day to 12 ton/day.

» The process of Pyrolysis has duration of 7 to 20 hours, depending on the amount and type of tyre (car tyre, truck tyre, etc.). During the process different vacuum values are applied in pre-determined temperatures and in different phases different gases are obtained and the condensed gas is stored as fuel-oil in tanks.

9. Port of China

FOB Lianyungang & Qingdao port of China.

10. Our machine pictures

11.Certification

12.Company profile