China top grade lime rotary dryer

1.Brief introduction of our company

Shanghai Wushang Machinery Manufacturing Co.,Ltd.is specialized in large and medium-sized series of crusher, sand making machinery , mine selection ,milling equipment primarily ,R&D ,production ,sales for the integration of machinery manufacturing company .Company headquarters is located in the national hi-tech industry development zone ShangHai city .

2. Application of lime rotary dryer:

The drying machine made by our company used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.

3.The working principle of lime rotary dryer:

Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

Main technical parameters

5 .Training &Service

Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide 2-years warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

FAQ

If you are interested in our ball mill, please tell me the information as follows:

1: what is your raw material?

2: what size is your raw material?

3: what is your capacity?

4: what requirement is your final product?

When we know the information, we will supply you the best type for you.