PS-NC1000 LCD 12V Intelligent Battery Charger with Battery Test Function

Model:PS-NC1000

Specifications

Four Function Modes

1).Charging Mode

A variety of charging current: 200mA/500mA/700mA/1000mA

2).Discharging Mode

To discharge the rechargeable battery, then charge it remove the memory effect.

3).Refresh Mode

To refresh rechargeable battery to its maximum capacity by charging and discharging the rechargeable battery repeatedly until no further increase in the capacity is estimated.

4).Test Mode

Check the rechargeable battery capacity in mAh/Ah.

Feature:

1.Charging rechargeable batteries in various current ( 200, 500, 700, 1000 mAh)

2.Each battery slot is controlled and monitored independently

3.Charging both "AA" and "AAA" rechargeable batteries simultaneously.

4.Overheat detection to protect rechargeable batteries from over-charging.

5. Minus delta voltage ( - dV) detection for charge termination.

7.Damaged batteries detection.

8.Integrated Reverse Polarity Protection

9.Various display modes during charging / discharging - the charging current (in mA ) , time elapsed (in hh: mm), the terminal voltage ( in V ) and accumulated capacities ( in mAh or Ah

10.With the appropriative adapter.

11.With USB output (5V, 1A)

12 Car charger is available