Klinger gasket

Spiral wound gasket (SWG) consists of thin metal hoop and nonmetal filler material which are simultaneously wound. The metal hoop is pre-formed in V or W shaped profile, which allows the gasket to act as a spring between the flanges. spiral wound gasket can be fabricated of any metal which is available in thin strip and which can be welded; so they can be used against virtually any corrosive medium dependent upon the choice of the metal and filler.

It is extremely popular due to the wide variety of available styles and sizes. Depend on its excellent compression resilience, it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc.

During the rolling-up of a profile metal tape, a filler is being included. It is PTFE or expanded graphit. The v-profile metal tape is produced by different metal materials or steels. The flexibility of the gasket in pressing on direction is being upgraded due to the v-shape cross-section.

Application:

Klinger gasket
Products	Style	Flange	For example
Basic type SWG	G1101a	Tongue and Groove	304/PTFE
SWG with inner ring	G1101b	Male and Female	304 304/FG
SWG with outer ring	G1101c	Raised face Flat face	304/ASB CS
SWG with inner & outer rings	G1101 Id		304 304/FG CS
SWG for heat exchanger	G1101c	Heat exchanger	304/FG with 1 bar of DJ
Special shape SWG	G1101 e	Special	Oval

Types:

a) R type: spiral winding onlyb) IR type: spiral winding with inner ringc) CG type: spiral winding with outer guided) CGI type: spiral winding with outer guide and inner ring.

Material application:

Filler material	Temperature	Pressure
Graphite	-240°C~+550°C in oxidizing media	300bar in hot water, oil, etc
	-240°C~800°Cinnon-oxidizing media	200bar in vapor oil, gases, etc
Asbest	-150°C~+450°C	150bar
PTFE	-200°C~+250°C	150bar

We provide standard and non standard spiral wound gaskets, adapt different flange and pipes, heat exchanger, manhole and handle requirements.

We constantly improve the quality, expand production scale and shorten delivery time, reduce the cost.