30 years Manufacturing history,

10 years Japan OEM, to create high-quality!

Description

The voltage transformer of the types JD6-35 and JDX6-35 are single phase, outdoor and oil-filled product. It is used for metering electric energy, voltage control and relay pr­otection in the electric system up to rated frequency 50Hz or 60Hz and rated voltage 35kV.

The iron core of this voltage transformer is three posts type. Around the middle post there is the primary and secondary winding. The body is the oil box. Being a full enclosed constr­uction, it is effective to prevent oil from ageing.

JD6-35 voltage measuring transformers ct pt

Technical data

1 .The voltage transformers are in accordance with GB1207-2006 and IEC 60044-2 standards;

2. Power factor of load: COSφ =0.8(lagging);

3. Creep age distance: the product accords with the request of ιι class;

4. Rated insulated level:40.5/95/220KV

5. The other technical data see following table:

Overall Dimension

ollowing three-phase five-pole type voltage transformer, this model voltage transformer is one new type anti-ferromagnetic resonance volt transformer developed for preventing transformer's burn danger because of ferromagnetic resonance resulted from different- degree earthing of power system, this product can run normally for long-term and drive protective winding produce 10Ov volt for starting relay even if 100% earthing fault taken place for system. This product could supply standard volt to voltage meter’ power and wait -hour meter, besides, it also can supply volt to earthing relay and earthing leak hunting device, so as to realize earthing alarm and leak-hunting function, consequently, it will replace earthing voltage transformer composed of JSJW and JDZJ model product. This model volt transformer is applied to indoor device's power system of AC frequency 50Hz, rated volt being 10kv or lower, to be used for volt and electric energy measuring as well as relay protection.

...