Characteristic Of Gel Battery 12V 200AH:

1) GEL condition: The effect of sealed reaction is over 99.9%.

2) Minor self-dischare: The GEL battery can be stored almomost two years with electrification, which is four times more than traditional AGM battery. It can be put into use without charging immediately.

3) Low rate of loss of coolant: The rate of loss of coolant of GEL battery is half of AGM battery, which can effectively slow up the dry of electrolyte.

4) Long service life: The designed life is over twelve years.

5) Good deep charge cycle performance: The GEL battery specializes in cycle use, which can reach to 100% deep discharge cycle and long service life to five hundred times.

6) Good over-discharging recovery performance: The GEL battery can recover its capacity too 100% after it discharges at 1CA for twenty one days.

7) Widely working environment: The GEL battery can be used at widely difference in temperature from subzero 40 to 60.

Battery Performance Characteristics Curves Of Gel Battery 12V 200AH:

Details Of Gel Battery 12V 200AH:

1) Container/Cover: Made of UL94HB and UL 94-0ABS Plastic.
2) Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.
3) Separator: Import high quality AGM separator.
4) Positive plates: PbCa grids minimize corrosion and prolong life.
5) Terminal post: Copper or lead material with maximum conductivity, enhance the high current rapidly.
6) Vent Valve: Allows the release of the excess gas automatically for safety.

Application Of Gel Battery 12V 200AH:

UPS and computer standby power supply, Solar and wind system, Control system, Telecommunication system, Emergency light system, Alarm system, Security system, Firefighting equipment standby power supply, Railway system, Ship equipment, Aeronautical facility, Electric toys, Power tools, Emergency lamp, Medical treatment equipment, Power system, Power station, Standby power supply, Military equipment, Telephone switching system and Etc.

Cautions Of Valve Regulated Lead Acid Gel Battery 12V 200AH:

1. Installation Notice
(1) Lay the battery with up-down direction instead of put it inverted in any case.
(2) Abnormal vibration or shock is not allowed.
(3) Do insulate when installation.
(4) Make the batteries ventilated and gapped.
(5) Do not mixed up different brand and manufacturing date batteries.
(6) Separate the batteries from organic solvent.

2.Application Notice
(1) Ensure the application conditions to be in compliance with manufacturer’s specification requirement.
(2) Charge battery to full at the first using or after long term storage.
(3) Since installed in UPS ,the battery life cycle will be seriously affected if the operating frequency is high.

(4) Inspect lead-acid battery regularly.
(5) Do replace a new battery if the ABS container is deformed or leaking.
(6) Fire risk exists if the wires do not joint tightly at terminal.
(7) Discharge once every three months is recommendable under no power-off condition.

If charging voltage and discharging characteristic is abnormal ,pls replace the battery soon.
(8) Replace the battery if capacity less than 50% of rated capacity.

(1)What kinds of battery will you provide?

We can provide full range of valve regulated lead acid batteries, such as Standard series, Deep Cycle series, Gel series, Front Terminal series and High Rate series.
You can check our web for further information, www.nppower.com.cn

(2)Where can we use the batteries?
Our batteries can be widely used in UPS and computer standby power supply, Solar and wind system, Control system, Telecommunication system, Emergency light system, Alarm system, Security system, Firefighting equipment standby power supply, Railway system, Ship equipment, Aeronautical facility, Electric toys, Power tools, Emergency lamp, Medical treatment equipment, Power system, Power station, Standby power supply, Military equipment, Telephone switching system and etc.

(3)Can your battery meet CE and UL requirements?
Yes, our battery not only can meet CE and UL, but also ISO9001; ISO1400; OHSAS18001; TLC.

(4)Can we change the color of the battery?
Yes, the color can be customer-made according to your requirement.

(5)Can you print my picture or logo on the battery?
Yes, OEM is available, we can print your picture or logo on the battery.

(6)What's the warranty?
Below 24AH, 1 year from manufacturing date shown on battery;
Above 24AH, 2 years from manufacturing date shown on battery.
Indeed, our battery products can be used for about 7 to 10 years.

(7)What's your hot sell?
Our batteries are sell well all around the world, such as 2V300AH, 2V600AH, 2V800AH, 6V4AH, 6V7AH, 6V12AH, 6V100AH, 12V7AH, 12V12AH, 12V18AH, 12V24AH, 12V65AH, 12V100AH, 12V150AH, 12V200AH and etc.

Why Chose Us:

1. As a specialized manufacturer
We possess our own lead-plate production line, which is the core technology for Lead Acid Battery.
Most important, we adopt advanced green formation technology, which can greatly decrease the effect to the environment comparing to the tank formation technology.
With high tin ratio inside the lead plate, we can greatly increase the battery life cycle.
2. As a qualified supplier in the world
We possess the following certificate
ISO9001--Issued by SGS, ISO14001--Issued by SGS, OHSAS 18001, CE, UL and TLC
With completely quality control system and production management system,
we do control the product quality and production efficiency very well.
3. As a mid-scale manufacturer in China
As a 1000 employees company, we can not only support you with quick delivery but also satisfy you with customized service.
We four factories with 2 lead plate production lines and 10 battery assembly lines,
the total sales amount for 2013 is 120 million dollars.

4. As a 12 years history factory
We can support you esteemed company with experienced professional team and reputable market reputation.
Any question, please don't hesitate to contact us.