Solid content 90% high polymer flocculant polyacrylamide powder

Description

Polyacrylamide is called PAM for short.There are four types of PAM, anionic polyacrylamide(APAM),cationic(CPAM),

nonionic (NPAM),and zwitterionic .Polyacrylamide is a polymer formed from acrylamide subunits,and it is highly

water-absorbent.Polyacrylamide and its derivatives can be used as a flocculant, thickener,paper intensifier and

liquid drag reduction agent.

Specification

Application

1)Industrial waste water treatment;

2)Drinking water treatment;

3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory;

4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery;

5) It can be applied in the paper-making industry, dispersant, retention aid, etc.

Features

1. Positive ion,negative ion,nonionic PAM , all can meet your requirements.

2. Good water solubility, complete dissolution will happen in cold water.

3. Cost effective flocculation result will be achieved when add little PAM. Normally

0.01~10ppm(0.01~10g/ m3) is enough.

Application Method

1. Take water without salt, mix PAM with water, density of aqueous solution between 0.05~0.3% is ok.

2. When dissolved, put the PAM into water, stiring speed need to be under 100~300rpm. Proper heating(< 50 °C) helps dissolving speed.

3. Adjust the wastewater PH degree in order to play the complete role of PAM; or test the PH in lab so as to choose the best model and its dosage.

4. Pls speed up mixing PAM with slurry or liquid which need to be handled, when flocullant occurred, pls slow down mixing, this will be good for flocullant increasing and sedimentation .