Ferro Alloy Product SiCa Lump

Location:
Anyang, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Ferro Alloy Product SiCa Lump

Introduction:

1. It is mainly used in steel, cast iron, cast practice embodied the practice process such as diffusion deoxidizer and later inoculant.

2. It intenses the graphite core , thins the graphite core, promotes the obtaining of A-type graphite in gray iron and improves the roundness of graphite in nodular iron.

3. Reduce the tendency of white iron and reduce the relative hardness.

4. High anti-decline ability.

5. Prevent declining of inoculant and nodular iron.

6. Enhance the section uniformity and prevent the shrink tendency.

7. Steady chemical composition. Smalldeviation in quality and ingredients.

8. Low melting point(approaching 1300°C). Easy for melting absorb and has little dross

Description:

Silicon Calcium alloy is compound alloy which is composed of silicon, calcium and ferro. It is an ideal compound deoxidizer and desulfurizer which can be used in the production of many kinds of steel such as rail steel, low carbon steel, stainless steel and other special alloy like Ni base alloy and titanium base alloy. CaSi alloy also can be applied as the heatraiser in convertor steelmaking workshop and as the inoculant or additive in producing cast iron and nodular cast iron.

Advantages:

1, Si and Ca can be controlled absolutely as needed.

2,Pulverization and deliquescence resistance.

3,Less impurities such as C,S,P,Al.

4,Products can be adjusted according to the customer 's demands.

Specification

Brand

Composition %

Ca

Ba

Si

P

S

content

FeSi40Ca18Ba4

18.0-22.0

4.0-8.0

38.0-48.0

0.05

0.1

FeSi40Ca15Ba4

15.0-18.0

4.0-8.0

38.0-48.0

0.05

0.1

Certification

1. ISO Approval

2. Certified as "Qualified &Reliable" manufacturer by CIQ

3. Mill's test report as each 1MT p.p bag by CIQ

Our company:

Anyang Jinyuan Metallurgical Materials Co., Ltd was founded in 1990s, located in Anyang, The company covers an area of 120,000 square meters, with registered capital 26.26 million, liquidity 90 million and fixed assets 60 million.

The annual sales is 320 million, paying tax near 13.6 million. The company has 10 first-class production lines, since we have advanced laboratory and superior equipments together with the sophisticated operators, the product quality is highly steady and guaranteed.

Our experience:

The products are selled to Hebei, Tianjin, Inner Mongolia, Shanghai etc., and exported to Russia, Korea, Brazil, Southeast Asia, EU ect, Which enjoys good trust from regular users by the stable quality. All specifications can be adjusted according to the customer’s demands.We warmly welcome friends frome all over the world to cooperate and negotiate business with us on mutual benefit.

We are always at your service.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Anyang Jinyuan Metallurgical Materials Co., Ltd.
Phone Number:
  86-0372-3116285
Fax Number:
 86-0372-3116285