[Mining and working requirement]

This equipment according to customer's requirements and characteristics of the mining operation, the work area for the channel, when install the equipment , you need to dig depth about 1 meter when the puddle installation (fresh water).This equipment can dig and separate the dinas under the 15m below the water, and transport it to the shore.

[Working principle]

The equipment is fission, chain bucket mining machinery, floating body use of fission of transverse frame box structure, Equipped with positioning anchor equipment, chain bucket device, bridge lifting device, material sieving equipment, transportation equipment, etc. Underwater rod is installed on the floating body electric winch lifting, material through the bucket device to dig into the drum sieve, And the sand will be transported on the shore by the conveyor belt.

[Fixed and mining method]

The orientation of the equipment for 4 anchor, the other end of the first two winch wire rope is fixed on, Tail 2 tail winch wire rope is also fixed. The equipment through the prelude and the winch to go forward; Fore and aft winch can be adjusted according to actual situation

[Using condition]

The highest air temperature in the working place: 400C

The lowest air temperature in the working place: -100C

The highest temperature of the river (or sea) water: 320C

Relative humidity of the working place: 70%

Working water:

It can dredge the sand in inland water, offshore fixed water

Soil property:

Sludge,Coarse sand, middle sand and fine sand

Techical Parameter

Total length 32m

Model length: 26m

Boat width: 5.4m

Model depth: 1.18m

Load draught: 0.6m

displacement 100.2t

dredging depth 0.6m~15.0m

Working capacity 120m³/h

Why choose us?

We are a factory, compared with trading company, we have more advantages as below:

1)competitive price

2)customers can test our machines at anytime.

3)prompt and perfect tafter -sales service

4)on-time delivery

5)20 years manufacture experience

A: Warranty of dredger

1) 12 months manufacturing warranty on all new installed component parts.

2) 12 months warranty on new engine.

3) 12 months warranty on hull and all fabricated parts.

B : Professional tachnician can be provided to service the machinery overseas

C: If you have any requirements or problems on our products, Please feel free to contact us , we are glad to provide the best solutions for you.