Digital hotel safe with high deposit security and audit trail

Construction:

- 5mm Cold-Rolled Steel Door

- Two3/4 inch (19mm) Diameter Steel Locking Bolts

- Scratch-Resistant Power Coat Finish

Hotel safe series:

- Size: H200*L430*D370mm

- Door thickness 6mm, wall thickness 3mm.

- Password: 1-10 digit master password/user password.

- LED display.

- Three methods to open: guest code; master code; mechanical key

- Net weight: 13kg

- Packing size: 215*450*390mm.

- Can load most sizes of laptops.

- Steel Structure, multiple bolts.

- 20' container can load about 700pcs.

Remark:

As this model is our most sales well model, we have many in stocks,so the delivery time is very fast.

The design and quality both are very acceptable by the customers.

USER’S MANUAL FOR MAX SERIES SAFE:

Double codes system: personal code (4-digits), master code (6-digits).

Factory settings: personal code: “1234”; master code: “888888”.

Opening

Input factory setting personal code or master code, when press the button there will be a beep. The LED displayer will show “open” when the code is correct, otherwise, it will show “E-code”.

Close the door:

if you press “ LOCK” within 10 minutes after open the door, then “CLOSED”, if you press “ LOCK” after opened the door 10 minutes or more, or you opened the door by master code, the displayer will show “E-CODE”, you can not close the door, you should input personal code (4-digits) and press “lock” key, the displayer will show “CLOSE”; when the door closed it will show “CLOSED”, then show the codes.

Code setting

1. Change master code:

under opening position, input original manage code and press “lock” , when the displayer shows “NEU”, you can input a new master code; then press “lock”, if it succeed the LED will show “OK”, indicates the master code has been changed.

2. Change personal code:

under opening position ,then input 4 new digit personal code when close the door, press “lock” , the displayer will show “CLOSE”, then “CLOSED”, and then the new personal code, indicates the personal code has been changed.

Emergency opening:

If forget personal code or other reasons make the safe can’ t be opened, you can use emergency key or override master code to open the door.

Code hidden function:

press “Reset / Clear” two times, then press “lock”, it will come into hidden function, when you input the codes, it only show “0” on the displayer.

Cautions:

Hold: if input incorrect code 3 times, the safe will be held for 15 minutes, during this period, it will no response press any key, and show “Hold+digit”, the digit is the holding time. After 15 minutes, it will recover to normal situation.

Low voltage: when it lowers than 5V, whether open or close, it will show “LO-BAT” on the displayer.

“Reset” is also a deletion key, press one time will delete one digit.