latest technology waste management in oil and gas industry with high output

Location:
xinxiangChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

welcome to china Henan Dinter Heavy Industry Machinery Co., Ltd.

waste to energy-waste management in oil and gas industry

what our waste tyre recycling machine can do for you

our pyrolysis machine have different capacity like 10ton,15ton,20ton,30ton and so on.

the mainly usage of pyrolysis machine including the following:

(1):turn waste tire , waste plastic ,waste rubber,waste rubber shoe sloe,waste fishing net, waste cable and so on into fuel oil (crude oil or furnace oil),carbon black ,steel wire etc.

raw material & output

(2)turn waste to energy . save non-renewable energy resource . protect our hometown, less waste more health.

(3)make high profit . you can get the fuel oil or diesel from waste tyre or waste plastic, you can sell the fuel oil and diesel to other plant,making high profit.

what can you get as the final product
outputusage
crude oil(45%-55%)

Burn as fuel oil :

power plant factory

Cement factory

Boiler factory and so on

Refine to diesel :

Low speed engine like

digging machine

road roller

loading machine and so on

carbon black(30%-35%)

Make carbon black bars through carbon black pellet machine as fuel

grinding to Increase the mesh of carbon black to make new tyre ,painting and so on

steel wire(10%)The steel wire from waste tyre can be re-sale to steel factory
combustible gas(5%)recycled to heat the reactor as fuel.save energy
how much profit you can get from this project
Dinter Feasibility Analysis Report of waste tires oil extraction machine
1set 10 tons capacity machine as sample
NO.ItermCost of per batch
110 tons of waste tire10T* 130$/T= 1300$
20.3 tons of caol0.3* 97.6$/T= 29.28$
3water0.4$
4electricity15.6$
5workers4* 16.3$= 65.2$
total cost1410.48$
NO.ItermIncome
1Crude oil (40%-45%)10T* 40%* 715.5$/T= 2862$
2Carbon black (30%-35)10T* 30%* 73$/T= 219$
3Steel wire (10%-15%)10T* 10%* 300$/T= 300$
4Gross profit3381$
5Daily net profit1970.52$
6Monthly net profit43351.44$
7Yearly net profit433514.4$
do you want to know more about our waste tyre recycling machine

technical parameter of 10 ton pyrolysis machine

Itermcontents
raw materialwaste tires, scrap plastic, waste rubber
structure formhorizontal
modelDT-10
size of reactor2200mm*6600m
24-hour capacity10ton
operating pressureconstant pressure
fuelcoal wood gas
average output45%-50%
material of reactorQ245R boiler steel
thickness of reactor16mm
rotate speed of reactor0.8 turn/minute
coolingwater cooling
working modecontinuous feeding
delivery time20days after receiving deposit
payment termT/T ,30% in advance,balance paid before shipment

steel fram of waste tyre recycling machine

working process

Firstly ,put the raw material into furnace, seal the feed inlet system.

secondly,burn the fuel material(coal,wood,or natural gas ,oil ) in the combustion system .the reactor will slowly heat ,when the temperature reach around 250 degree celsius,it will produce oil gas.

oil gas will be processed by our technology ,then gone to cooling system to cold liquid oil.

the gas which can not liquid under normal pressure ,which will be desinged to back to combustion system to instead the fuel material to burn the reactor which can save energy very much.

after finishing oil produce ,the temperature of reactor will go down ,in the same time ,carbon black will be discharged automatically.

Lastly,when the temperature fall to 100 degree celsius,worker could open the door of reactor to discharge of steel wire, then can start another batch working.

advantages of our waste tyre recycling machine
energy saving

A . When heating ,the reactor is rotating ,so the whole reactor can be heated,

B. Special design on burning system make fuel fully burned

C. Need no circulating water,save water and no pollution emission

D. Vacuum device equipped on gas separator can be speed up the pyrolysis

process

E. Waste flammable gas can be recycled to heat the reactor

safety

A. Automatic welding both inner and outer

B. Equipping thermometer pressure gauge and alarm to guarantee safety

C. Water seal can prevent backfire and reduce corrosion

high working efficiency

A. Automatic feeding needs less labor force

B. The whole process need less time

C. Long lifespan( 8 years)

more light oil be produced(75%light oil )

the pictures will show you our waste tyre recycling machine

reactor

stir & static seal---the sealing material is circule shaped graphite,in high temperature can perform good.prevent oil gas leakage.

compensator---(1)resist displacing from expansion and contraction.(2)revise concentricity of the reactor

gas separator

depositing tank

cooling system

dedusting system

the pictures will show you the installation site

the pictures will show our delivery
the picture will show our customers who have visited our factory
the best service for you.

(1)we have Humanization design for you according to your situation and you are free to visit our factory

(2)Warranty: The warranty period for reactor is 12months, and other part exclude spare parts are 12months. The problem caused by wrong operation of workers shall not be responsible by our company.

(3) Installation and Training: Our company will send one technician for each set of machine for guiding your installation testing the machine and training your workers(if buyers need it



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Henan Dinter Heavy Industry Machinery Co., Ltd.
Phone Number:
  86-0373-2025417
Fax Number:
 86-0373-2025416