5 in 1 mug heat transfer printing machine price

Fuction
Baking color logo, photo image or picture on the mug surface for advertising, gift purpose with artistic and applied effects.

Specificationsmug heat press machine
1.Higher efficiency
2.Easy to adjust the pressure
3.Fully digital temperature control

This combo mug heat press machine ( 5 in 1 ) can imprint 11oz, 14oz, 15oz coated mugs with higher efficiency (5 mugs at every 3 minutes), suitable for big quantity mugs printing.

Feature
Fully digital temperature control
Higher efficiency (5 mugs at every 3 mins)
Stable in quality & competitive in price
Easy to adjust the pressure
Electricity saving & durable
Solid steel welded framework
FREE CD demonstration
1 year warranty

Parameter
Dimension 80 (L)*48(W)*45 (H) CM
Net weight 25 kg

Max Mug height 10.5 cm
Heating plate size 150 * 230 mm
Heating power 1.5 KW
Power 220 V/50 Hz 110 V/50 Hz
Working temperature 160-200 Degree centigrade

5 in 1 mug heat transfer printing machine price

Opearation
1,Place a shaped mug, close the handle with appropriate pressure and then plug the power
Caution! The machine must to be protective earthing properly before operating.
Avoid excessive pressure.
2,Cut the picture size to be large as the mug surface and then put it to the mug by adhesive tape.
3,Setting the temperature to an appropriate (between 180°C- 200°C) by turning the temperature knob;
4,Setting appropriate time, approximate 30 seconds, the temperature rising time is 2 to 4 minutes;
5,Place the picture-wraged mug, close the handle and then turn on the power, red indicator lighting;
Caution! The size of picture should be large enough to cover the whole mug surface to avoid singe and impress.
6,The machine shall start the timer automatically and enter the status of constant temperature when the temperature rises to the setting degree;
7,Release the handle when the buzzer rings and take out the mug;
Get rid of the picture paper 3 seconds after the mug to be took out from the machine.
Caution! For protecting the heating mat, place the shaped mug all the time and close the handle when the machine is not being used.
Another piece of paper should be used to cover the mug surface to avoid the direct touch of the mug surface with the heating mat, when the picture is too small to cover the whole mug surface.

Adjustion
Pressure To adjust the handle to increase or reduce the pressure.
Time To set the timer to the appropriate time, around 30 seconds.
Temperature Turn the temperature knob to set the appropriate temperature, between 180°C- 200°C
Caution The machine needs 2 minutes break every 60 minutes working period when in mass production.

Problems shooting
Color too light The baking time is not enough, so add more baking time which will get the real color.
Blurred image The baking time is too long, just reduce the baking time will make the image distinct.
Partly color light Caused by the short pressure or the coating is uneven, need to increase the pressure or replace mug with uneven coating.
Blurred image caused by heating mat replace the heating mat.
Scar on image The baking time is much too long, just reduce the baking time largely to remove

Introduction to Heat Transfer Machine

Heat press machine can be a variety of heat transfer by thermal hot on cotton, hemp, chemical fiber fabrics, but also for screen printing, glue, foam, and other heat treatment process, but also the color color, portrait photos, landscape design and other baked in porcelain, metal plate, especially suitable for the production of medals, commemorative certificate card, Shandeng cultural, economical and practical, exquisite designs. It is an alternative to traditional embroidery and screen printing, and costs, and the effect is much lower than and superior to the general multi-colored embroidery and screen printing.

Heat transfer machine classification

Press the hot plate shape and the use of function: flat heat transfer machine (mainly for apparel fabrics size specifications set full), hot cup machine (hot cylindrical object can be generally used for cups), hot cap machine (with a round arc, the finished cap is generally used), the hot plate unit (also planar, but can be hard surfaces such as metal stamping porcelain). By operation of the power points: manual heat press machine, pneumatic heat press machine, hydraulic press machine (hydraulic press machine); or manual heat press machine, semi-automatic heat press machine, automatic heat transfer machine. By agency: common type, high-pressure type, shaking his head type, pneumatic type, hydraulic type (hydraulic type), etc.

The principle of heat transfer machine

Heat transfer machine with three concepts, namely, pressure, temperature and time. Working Mechanism: heating by the heating plate, with a certain pressure, temperature and specific time, the upper layer and the thermo-transfer sheet bonded to the substrate or to the substrate material at the permeate.

(1) microcomputer intelligent temperature control \ time integrated controller, high accuracy (temperature accuracy of ± 0.5 ° C);

(2) heating wire and the heating plate the whole cast, safe, durable, heat distribution;

(3) heating plate coated with Teflon non-stick coating;

(4) Electronic time control, process completion signal alarm indication;

(5) pressure can easily adjust;

(6) floor installation of high-temperature silicone foam board, temperature 350 ° C without deformation.

5 in 1 mug heat transfer printing machine price

Heat press machine maintenance

1, pressure: If the pressure is not enough or too much, you can adjust the pressure screw rod (located at the bottom of the aluminum), clockwise to increase pressure, counterclockwise to decrease pressure.

2, Time: When the time arrives stamping buzzer does not ring or ring constantly, micro switch contact point shall inspect the tail tank is moderate, if appropriate shall be adjusted to the appropriate location.

3, temperature: warm up for about 15 minutes, when the temperature reaches the set temperature, heating indicator light turns off, you can begin stamping; such as boot heating plate does not heat a few minutes, please check the line.

Heat transfer machine to use

1, the pull handle direct pressure , the heating plate is fully open. Plug in the power , turn on the power switch, indicator with bright ; Note: Due to the high power of the machine , the machine must have the proper protection of solid ground ! ! !

2, the temperature adjustment: press " +" or " - " button to set the temperature , press the " + " button to increase the temperature setting , press the " - " button to lower the temperature setting .

3 , adjust the timer knob on the left , transferred to the appropriate time to 10 seconds ( the length of time depending on material) ;

4 , when the temperature reaches the set value , the machine will automatically enter a constant temperature ;

5 , the transfer material such as clothing and flat on the printing stage, and then stacked to transfer pictures , handle the pressure forced under pressure ; Note : The pressure is not too large , otherwise it will cause deform handle the pressure ! Advance should adjust the pressure .

6, the time, the buzzer sounds , then the pressure will be put on the handle , remove the transferred material such as clothes , torn backing paper .

7 , the metal plate baking temperature is generally 170-200 °C, time of 20-40 seconds ; porcelain baking temperature is generally 200-220 °C, time of 120-150 seconds ; baking fabric temperature is generally 120-140 °C, time of 5-10 seconds. Heat transfer machine is a core component of the heating plate , so the choice should focus attention on heat transfer machine . Upper and lower plates should be aluminum material , and the heat pipe is cast aluminum inside. As aluminum plate is slotted , and then attached to the top of the heat pipe will cause unnecessary energy consumption , use warming will slow , constant temperature difference and other shortcomings. Under the case of iron plates or other material, long-term work under high temperature and pressure environment, it is easy to deform aging. According to a different area of the heating plate , the weight of the upper and lower plates Jieyou standard , if too light , too thin , heating panels will be easily deformed , affect use. Generally speaking , the greater the weight , the more reliable performance . Heat transfer machine on board after pressure should be , and the lower plate is absolutely parallel . If the test is close to the upper and lower plates bite can be placed in the four corners were a sheet of cardboard or other resilient material object, and then pressing the handle until the death of the upper and lower plates bite card , pulling the cardboard outward , to know whether the formation of the upper and lower plates , the machine is qualified.

Heat Transfer distinction

1, What is heat transfer ? Freedom heat transfer was first circulated in the United States , Western Europe area open to nearly two years in the country gradually heat up. Early heat transfer heat transfer is not so much the word as it is hot , mainly because some popular slogans, characters , and later gradually developed into a lively variety of patterns. With economic development , social progress , the younger generation increasingly flaunt personality, coupled with the development of related software development of computer technology, the heat transfer industry in terms of freedom , is undoubtedly powerful. Heat transfer costumes have been popular in Europe and America forming, became popular casual wear. Due to its simple printing process , easy to operate , economical and easy to get the necessary materials , and because widely printed on a variety of substrates, such as knitted T-shirts , denim, plush , toys, shoes, backpacks , all kinds of nylon caps. Available transferred to the fabric heat transfer machine , can be used for industrial , civil and easy . Heat transfer can be divided into foam heat transfer, offset heat transfer, heat transfer penetration , colorful beads heat transfer, laser heat transfer, flocking heat transfer, reflective heat transfer , heat transfer and water-based gold and silver hot flower variety . Foam Tang : distinct levels , elongation good , clear transfer security , patterns , bright colors . Penetration of heat transfer: ink thin , breathable , clear, delicate, the overall effect is natural and realistic . Offset Transfer : fine pattern , the effect is beautiful, there are Offset photo effects , to maintain the original charm and artistic charm. Water-based heat transfer: for a variety of fabrics , good water resistance , flexibility and superior strength . Gold and silver heat transfer: golden shiny , suitable for knitted T-shirts , backpacks . Heat transfer from the United States , has a long history and tradition , because of its simple printing process , easy to operate , Colorful beads heat transfer: pattern composed of colored beads , especially for women and children ; Laser heat transfer: colorful laser patterns. Flocking heat transfer: pattern of flocking effect ;

2, the principles and applications of heat transfer Heat transfer technology is widely use in the printing industry , clothing iron and metal flower photo also use heat transfer, heat transfer technology to learn and difficult to master , but do not understand the misunderstanding . Heat transfer theory is very simple : the video output on the transfer paper , and then to the appropriate temperature and pressure transfer in different materials, but it is not simple to see a lot of the high failure rate of heat transfer shop , has been unable to find ! the reason , in my possession with a bad seal , but the operation might be able to open a long time "T -shirts printed fault Exhibition ." Go to the local heat transfer printing is very simple, but very uniform and not fall off a large area depends on technology , the heat transfer is very important transfer interface , which is the transfer paper processing technology , the temperature is too low can not be attached , the temperature is too high will spend pattern dizzy or charred . And some heat transfer store to buy a thousand dollars a heat press machine , has been uneven or unstable quality printing , in fact, is not the same as thermal heating system , the temperature is uniform ? Pressure is just ? The relationship between the heat transfer quality, good pressure and heat transfer functions to solve a problem of a different material thickness . The above shows what you pay for , "we . Must first sharpen his tools" , the most important thing of course is to use , printed calendars , T -shirts, hanging scroll , punching bags , medals, golden eagle silver eagles photo , tiles, glass , wood logs edition ...... that nothing is printed , nothing is earned , where India , where it is used to earn that reason !

3 , what is the transfer paper ? Several sub ? Transfers can be stamping patterns inkjet printer output , and then printed onto the clothes. Divided into light and dark transfer paper transfer paper . White light transfer paper suitable for printing , such as light-colored clothing ; dark transfer paper suitable for printing black and other dark clothes .

4 , what is the heat transfer paper Pattern transfer paper is already printed on paper , to be printed when direct transfer can be, there are a variety of printed patterns to choose from.

5, with transfer paper printed what clothes to use ink ? Or use thermal transfer ink ? When ordinary ink can be printed using transfer paper , waterproof ink better ; If using a thermal transfer ink printing , inkjet printing paper, as long as the fight , but use special clothes.

6, with thermal transfer ink is transferred to the image on the T -shirt color is very light what is the reason ? Transferred to the image on the T -shirt color is very light, mainly due to the following aspects :

(1) , transfer ink quality problem, you can try to change an ink ;

(2) , the problem of inkjet printing paper , inkjet paper and some can not completely transfer the image up , you can choose to have a special coating for inkjet printing paper ; The relationship between temperature and time of transfer

(3) , which is the problem of operating skills . If the time is too short , the temperature is not enough, the ink transfer is not sufficient, the main reason is caused by light colors ;

(4) , T -shirt Fabric choice if the transfer on cotton fabric , then the color is a little lighter , which is the degree of adsorption of the fabric of the ink of the decision, if the chemical fiber fabric color is very bright for the transfer.

7 , the transfer of light fastness and wash clothes , how? Direct sunlight will not fade . If the water is not too acidic , washing generally will not fade , but not soak too long.

8, T-shirt and a cotton fabric maintenance methods after transfer

1), T-shirt have just transferred some hard feelings , you will become soft washed some .

2), new T-shirt to be processed after 2 hours before washing . Turn to the back to wash the clothes .

3), Do not rub their hands T-shirt patterned surface ( patterned surface material does not adhere dirt ) .

4), Do not wash with a detergent containing bleach .

5), below 40 ° C with warm or cold water wash.

6),try not to wash with a washing machine .

7),After washing , do not use dryer drying .

8),to dry naturally, do not wring the clothes , not the T-shirts on the sun exposure .

9),If the clothes need ironing , dry can be used in the temperature steam ironing ( including non- elastic fibers ironing temperature , so as not to destroy the organizational structure of elastic fibers , the impact of clothing elastic effect ) , do not iron directly on the pattern .

10),After ironing, not clothes into the narrow space, available hanger hanging or lay flat to maintain the shape of clothing .

9 , turn plain paper printing ink + Transfers + with ordinary clothes and good clothes and India ink which effect ? There are costs ? Almost two costs , there will be a layer of glue on the transfer paper and transfer paper printed with clothes , with no transfer ink printed .

Shaking heat press machine can be a variety of heat transfer by thermal hot on cotton, hemp, chemical fiber fabrics, but also for screen printing, glue, foam, and other heat treatment process, but also the color color, portrait photo , landscape design and other baked in porcelain, metal plate, because the machine has been specifically designed to produce greater pressure, and heating plate can be rotated 90 degrees to the right and make your operation more convenient and safe, especially for continuous making ordinary heat transfer, heat transfer American cultural Shandeng products, economical and practical.