Product name

Old tire to oil recycling machine

Also known as waste tire pyrolysis plant

Function of tire to oil recycling machine

Pyrolysis plant is for used tires recycling. It can recycle used tires into fuel oil, carbon black and steel wire. Waste tyre will be fully recycled into profitable products.

Technology feature

Pyrolysis is a green technology for waste recycling and waste management. Besides waste tires, it can also recycle waste plastic and scrap rubber. It solves environmental pollution which is becoming a serious problem in everywhere. Meanwhile it recovers renewable energy. I believe it's a meaningful industry.

What's the capacity of old tire recycling machine?

Now we are offering 5 ton, 6 ton, 7 ton, 8 ton, 9 ton, 10 ton capacity per day. (For example, 10 ton capacity machine can recycle 10 ton waste tires per day)

A simple introduction of running process

1st step - feed used tires (or waste plastic, scrap rubber) into reactor. If you feed 10 ton raw materials, it needs about 2-3 hours by auto-feeder.

2nd step - start heating. You can use wood, coal, oil or gas to heat the reactor.

3rd step - being heated, waste tires (or plastic, rubber) is becoming oil gas by pyrolysis. About 3 hours later, oil gas comes out.

4th step - oil gas goes into accessories and being cooled by condensers.

5th step - after being cooled, it becomes oil and be collected by oil tanks. The oil producing process lasts about 10 hours.

6th step - about 8-10% residual gas produced from pyrolysis can not be cooled. But don't worry, it won't be wasted. We recycle these gas into furnace for heating purpose.

7th step - and of caurse, the flue gas produced by burning fuels is processed by dust removal device before emission.

8th step - when the oil producing process is finished, you give pyrolysis machine 2 hours to be cooled. Then you can start dischargging carbon black left inside reactor (and steel wire if you feed whole tires). The time for discharging is about 3 hours.

So totally it needs about 20 hours for 10 tons tires pyrolysis.

The oil yield of old tire to oil recycling machine

You may ask how much oil you can get from 1000kg tires.

Well, from 1000kg tires, you can recover 450kg oil, 300kg carbon black and 150kg steel wire, if it's whole tires. This is just a normal rate. If you remove steel wire before doing pyrolysis, or cut tires into pieces, the oil yield is higher accordingly.

For more information, welcome to talk with me through email or chatting.

And you're warmly welcomed to visit our company. You can see all materials we are using and professional manufacturing processes here. Also you can see running machines in our factory.