SOLAR LED LIGHT

Autonomy/rainy days backup solar led light from china manufacturer

1. SPECIFICATION FOR SOLAR LED Light:

Name	Specification	Quantity	Parameter
Solar panel	280W/24V	1 piece	Polycrystalline solar cell, 156x156mm, 72 piece. Vm: 36.145V,Im: 7.775A,Voc: 44.949V, Isc: 8.218A Size:1956x992x50mm with 90cm wires,MC4 Connector. and Weight:27KG Warranty: More than 90% output power in 10 years .and more than 80% output power in 25 years. The product have passed TUV, IEC, MCS etc certificate.
Light source	LED80W/24V	1 piece	Single Integrated Power LED(80W),Woking Voltage DC24V,General luminous:8000lm,LED Luminous Efficiency:100lm/W,Center illuminance:25lx,Ra>80,Color temperature:2700-7000K,Protection Grade :IP65,Working life ≥50000hours. Lamp shade is Die-casting aluminum, and its face is UV-resistant and corrosion resistant . No bad glare; No Strobe; Start without delay .Low maintenance cost .
Controller	20A	1 piece	PHOCOS CIS Series,12V/24VAutomatic identification , light control and time control,Protection Grade IP68
Battery	12V/150AH	2 piece	Gel Battery that dedicated to solar energy. For the solar energy street lamp that in simple circulatory system. And its advantage is that :the small self -discharge rate ,the better deep discharge, Top charge acceptance, large capacity,strong start in low ,the good shock resistant and Anti-temperature charge Production Size: 483x170x240mm,Weight :44.5KG
Pole and other steel fitting	10M	Set	Material: steel Q235 or Q345; hot dip galvanized and powder coated . Solar panel bracket is consist of Angle iron and Flat iron. Square tube is assembled by bolt , any section is made with mold. With high efficiency and precision , standardized parts can replace each other and the same time increase the packing quantity and reduce transport cost . Battery body are welded after 2mm plate stamping molding Lamp arm is consist of welded tube and iron plate.
Wires harness	--	1 piece	With the special connector ,standardization,substitutability ,high installing efficiency,saving cost . Wire harness can be designed according to different lamp type .
others	Baseplate, steel rod, standard component and so on
Conditions	Voltage of system: 24V, working time: 10 hours/day , Work temperature -20°C - +50°C
Packing Quantity	65set/40HQ

2. Description of design for solar LED light

1. This system configuration is suitable for area that peak sunshine for five hours, three continuous rainy days. System configuration can be designed according to customer's specific project requirements and climate conditions.

2. The energy of Solar street lighting is form solar radiation, Whether the sunlight that exposure to solar panels is abundant or not directly affect lamp lighting effects, so solar panels can exposure to sunlight at any period of time , so when Select where to install the lamp, you should avoid tall buildings or other objects that can block the panels.

3. In order to ensure its beautiful characteristic and its ability that receive better solar radiation, we suggest that you should clean the dust on the solar panels every half of one year , but don't rinse area from the bottom up.

4. Battery is placed on the top of the pole, and it’s good for battery heat-dissipation, shortening the length of the cable, reducing pressure drop, easy installation & anti-theft.

3. Product obtained CE TUV SONCAP and MCS certificate application range

The road, City Road, Pedestrian Lane, Squares, Schools, Parks, Gardens, Residential areas, lant and other places of outdoor lighting.

4. Solar LED light simulation

***************************************************************************************************************************

1. LED Description

LED lamp shade is a transparent shade and made of polycarbonate plastic injection molding material, high strength, good light ; using LED as the light source, and LED is light emitting diodes, has the characteristics of high efficiency and long life.At present, the lamp is shaping up as a mainstream lighting products of new generation.

Using vacuum coating launcher ; high purity aluminum reflection cavity, light shell and heat dissipation body ; high strength of tempered glass cover ; high-power LED light source ; efficient constant - current source.

Use intellectual property rights to encapsulate the single integrated high power (80 w) LED light source, applying the unique light source design of multiple single chip integrated single-mode , and choose imported high brightness chip;

2. Battery Description

Gel battery is able to bear overfull charge or overfull discharge, able to bear shaking,shock resistance, Long storage life. High quality alloy plate grid and unique electrolyte formula, Delicate and perfect processing and manufacturing technology, Make the battery has a large capacity,good deep discharge performance,charge acceptance ability,low temperature starting ability,low self-discharge rate,Good performance of resistance to temperature change,,long life characteristics and so on. Security seal structure, no need add acid or water to maintenance it, Does not leak acid, No acid mist, Environmental pollution free.

Storage battery is gel deep cycle discharge type, apply to frequent load changes, harsh environment temperature conditions. inside a specially designed grid to ensure the reliability of the depth of discharge cycle, under this 100% discharge circumstance, could recycle use it 400 times. Used for solar street lamps and other light cycle system, could guarantee the cycle life of more than 2000 times.

3. Controller Description

CIS controller is special designed for solar street light, provide perfect, multiple protection for solar street lamps’ electrical systems, and through good control strategy, effective extend the system’s power supply time.
*protection grade: IP68, effective dust-proof and water-proof
*sturdy and durable aluminium alloy case, anti-corrosion
*four stages charge control(main charge,powerful charge,equalizing charge,float charge)
*Single and double street light output contro l flexible
*infrared remote controller (CU) set, simplicity and convenience operator
*LED status indicate
*at night all the time,morning and twilight double time light-operated/time control timing function
*external temperature sensor, automatic temperature compensation
*output power regulatory function, saving energy and protecting environment.

*compact structure, small volume, easy to install

Phocos controller Fuction

*Over protection: could chose LVD mode or SOC mode

*Overvoltage protection: 12V system 15.5V, 24V system 31V cut off the load

*Low-voltage protection: 12V system 10.5V, 24V system 21V cut off the load

*Over-current protection: When the actual current is 110% greater than the rated current, Delay of 120 s to cut off the load

When the actual current is 150% greater than the rated current, Delay of 10 s to cut off the load

When the actual current is 200% greater than the rated current, Delay of 3 s to cut off the load

*Short-circuit protection: When the actual current is three times greater than the rated current, immediately cut off the load

*Reverse polarity protection

4.Solar panel Description

1. We could ensure the conversion efficiency of solar panel with high efficiency polycrystalline cells and high transmittance tempering glass, this not only reduce solar power supply system installation cost ,but also increase unit system area electric-power output .

2. Solar power float ±3% , it could ensure our customer get the power from solar panel, reduce the power loss caused from mismatching power, improve system output function and bring more benefit for customer .

3. Obtained TUV and so on, we keep authentication high consistent with standard testing in actual production.

4. 5 years’ warranty, no less than 90% of standard output power is within 10 years, 80% of standard output power is within 25 years.

product constitution

Solar panels are made of monocrystalline or polycrystalline silicon solar cells, series connection or parallelconnection, then hot-pressed and sealed by tempering glass and EVA,TPT, equipped with aluminum alloy frame, have the characteristic of the wind-resistant, hail resistant and easy installation. The panel is widely used in solar lighting, lamps, household power supply, road transport, building and photovoltaic power station, etc.

1. Tempering glass

2. EVA

3. soler cell

4. back veneer

5. junction box

6. aluminum alloy frame

5.Pole and other fitting

Components surface is sprayed with the powder after hot galvanized anti-corrosion treatment, white color (or other colors on custom’s request), smooth surface, non-discolouring , no pinhole hang, no flow, no peeling phenomenon ; Galvanized layer thickness is not less than 85 microns, the coating thickness is not less than 100 microns. Galvanized treatment is in accordance with the standard of GB/T13912-2002 " Film pencil hardness measurement”, GB/T1732-1993 “Paint film punching resistance measurement”,GB/T9286-1998 “Paint film of the cross test”

6. CERTIFICATE--- TUV, IEC, CE, MCS, SONCAP, ISO, BV, SGS

7. Loading Picuture

8. Part of solar LED light project Picuture:

9. WORKINGSHOP PICTURE

Other new design products:

1) Solar street light

2) Solar panel

autonomy/rainy days backup solar led light from china manufacturer