High-grade Synthesizes Electrical Operating Table

Electrical Operating Table is a high-grade synthesizes multi-functional operating table. Is the introduction overseas advanced technology. Which can be applied to all kinds of operations. The operation is extremely convenient. It can do the C shape armX-ray examination and photography on the whole body. Also the head part and the leg part of the table can exchange.

Features:

It adopts hydraulic engine imported form Germany as the driving force.

It has the function of auto-reposition,and adopts Germany CONTELEC sensor.

It has hand-control and panel-control which work respectively,adopts MCU process,and its self-lock can avoid error-touch.

Its engine uses DC24V,which increases the security of electric.

AC and DC can use at the same time.

Technical Specifications:

Length:2000mm ± 50mm

Width:500mm+20mm

Height Adjustment :(720~1020) ± 20mm

Loading capacity:400kg

Tilt(left)/Tilt(right): 18º

Trendelenburg/Rev-Trend: 25º

Head board fold upward: 40º

Head board fold downward:90º

Backboard Upwards:55º

Backboard downwards: 25º

Waist board lifting:0-100mm

Lumbar upper corner"∧":150º

Lumbar lower corner"∨": 150º

Mains voltage:AC 220 50Hz

Input power:500VA

Introduction:

It is a cost-effective,multi-performance mobile operating table that meets the requirement of different surgeons.The clinical staff can easily operate the table qucikly and effectively,even in a darkened operating theater. The large loading capacity accommodates patient of different sizes.

Standard Accessories:

A pair of shoulder support frame, a pair of waist support frame, a pair of arm resting frame, a pair of leg support frame, a screen frame, a pair of pedal foot board, a waisthand.

Features:

1.Imported hydraulic motor and solenoid valve from HOERBIGER.

2.Electro-hydranlic mode of opeation is adopted.Two control modes(hand-held remote controller and panel)are available to control various movements.MCU processing is used. Self-locking function is provided to avoid false triggering.

3.Quality stainless steel 304 is used for table support,base plate,column shield and rails on both sides of the table,casy for cleaning and sterilization.Console supports the use of cast aluminum parts, never rust.

4.The mattress is wrapped with imported artificial leather.High-density memory sponge is formed in one piece,with no seam.

5.Imported carbon steel plate is used for the table top, which is convenient for X-ray photography.

6.The head part can put into leg part. It can enable the C arm, X-ray examination and photography on the whole body.

7.Electric braking device, convenient for shifting the operation table.

8.It has the function of auto-restoration.

9.AC and DC can use at the same time.

10.One press to" ∧ "or" ∨ ".

Product Photo: