300L split Pressurized Solar Hot Water Systems,solar water heater price

Seperated Solar Water

Balcony Solar Hot Water System

The split solar hot water system is composed by heat pipe solar collectors, cylinder water tank, controller, circulation pump, pressure gauge, flowmeter, pressure releasing valve and other accessories.

The split solar hot water is an active system, because it uses a pump with a controller to circulate the fluid in the system.

When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically, the heat-conducting liquid transfers heat to water by heat exchanger in the water tank.

Storage tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can be installed anywhere of the building.

The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems.

Key features:

1 Adopting the best conduction performance metal-heat pipe,it is sure that no water goes into the tube and there are no incrustation,no bursting,and it starts up quickly and conducts heat fast;

2 The super-thick insulation layer,which is foamed by environmentally friendly Freon-free polyurethane and it can reduce the heat loss greatly and has better insulation effect and saves the energy;

3 The collector and the water tank are separated,the water tank can be installed anywhere, and the system runs under the forced pressure;

4 Pressurized design, with strong hydraulic pressure you can have hot water when you turn on your cock.The water rush out with strong hydraulic pressure make your bathe more comfortable;

5 The controlling device is specialized,so the system runs automatically;

6 Arbitrary combination with structure of the house,collector suitable for different structure of house,either on the roof or balcony.

Specifications:

1 Evacuated tube size: Φ47x1500mm Φ58x1800mm

2 Evacuated tube materials: New trivalent element heat tube

3 Inner tank: Stainless steel SUS304-2B 1.5mm/2.0mm

4 Outer tank: Painted steel

5 Copper coils(single): Φ12mm, thickness 0.8mm, length 15m

6 Manifold: stainless steel/aluminum alloy

7 Insulation:Insulating layer is high dense polyurethane foam, thickness: 55mm-60mm

8 Frame: Stainless steel or aluminum alloy

9 Pressure: 0.6 MPa

Application area:

The twice heat-exchange system is suitable for areas where the temperature is lower.

300L heat pipe split pressurized solar water heater

Structure:

The split solar water heater system is composed by heat pipe solar collectors, cylinder water tank, controller, circulation pump, pressure gauge, flowmeter, anti-returning valve, pressure releasing valve and other accessories.

Working principle:
1) The split pressurized solar water heater composed of solar collector, storage tank, controller, working station and installation parts.
2) When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically.
3) The circulation pump makes heat-conducting liquid circulate automatically.
4) The heat-conducting liquid transfers heat to water by heat exchanger in the water tank.
5) In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.

Features:
1) Strong hydraulic pressure make your bathe more comfortable: pressurized design, with strong hydraulic pressure you can have hot water when you turn on your cock. The water rush out with strong hydraulic pressure make your bathe more comfortable. With this kind of solar water heater, your family will be more comfortable.
2) Modularized collector, arbitrary combination. Module consist of efficient heat pipes.

Arbitrary combination according to your demand can supply enough hot water anytime for your family use.
3) Intelligent controlling and multiple function. Compositive and intelligent controlling system more convenient. You can know the temperature of water anytime via controller.
4) Arbitrary combination with structure of the house: Collector suitable for different structure of house. Either on the roof or balcony. It is the intersperse of architectonics.

Specifications:
1) Water tank (interior): 1.5mm Stainless steel 304 2B

2) Manifold: stainless steel/aluminum alloy
3) Glass tube: New trivalent element heat tube (58mm x 1.8m, 47mm x 1.5m)
4) Solar working station
5) Water capacity: 150L, 200L,250L, 300L,400L,500L

6) Pressure: 0.6MPa (6 bar)