Summary:

J-NET-XF6 series outdoor telecommunication cabinet is maily used in the field of traffic, CATV, electric power etc.Can be used under different conditions: gale, rain, snow, hail, frost, smog and solar radiate etc.The main part of the cabinet is made of magnesium and aluminum alloy ( according with the United States military standard) . Divided into four parts: equipment zone, wiring zone, cell zone and electric source zone. It can be last for 20 years of normal use.

Poduct Specifications:

l Waterproof, dust proof:

Sealed by import seal belt, waterproof design and air filter instrument realize the efficient protection,IP 55

l Temperature and humidity solution:

We adopt different components to control temperature and humidity to ensure the best working condition inside the cabinet.

l Anti-corruption solution:

The surface of the cabinet , fan and air-condition are made of aluminum alloy, can protect from UV and salt material.

l Machine protection solution:

The cabinet is designed specifically to protect it from human damage, earthquick and other damages.

l EMC protection

Dealed with hydrochloric acid, use EMC seal belt , special earthing to avoid and reduce creepage.

When the inner temperature of the cabinet below -5 , the heater will start.

The fan and heat exchanger adopt the technology of speed regulation, and the wind speed of the outside loop fan can be adjusted in accordance with the temperature of air intake of material circulation. Sealed type of circulating system is sealed and insulated.

Both internal and external circulating systems adopt the mode of air blowing, for external circulation, the air of the cabinet temperature is blown into the heat exchanger by centrifugal impeller fan in the lower part of the heat exchanger, the airflow passes the heat exchange medium and also exchange heat mutually, and takes part heat of the heat exchange medium, meanwhile the temperature of the gas will be increased, then it will be discharged by the air exit on the top of the heat exchanger naturally; for the internal circulation, the hot gas inside of the equipment is blown into the heat exchanger by the centrifugal impeller fan in the upper part of the heat exchanger, the hot airflow exchange heat with the exchange medium when passing it, and the temperature of the gas will be decreased, while the temperature of the exchange medium will be increased, then the gas after cooling will be discharged naturally from the air exit on the bottom of the equipment.