Characters of our Baby Incubator:

Microprocessor based servo controlled temperature system

Air temperature,skin temperature,humidity,timer and heat power separately displayed by LED

Alarms functions : Power failure; over temperature; temperature deviation; temperature sensor failure;fan failure;

>37 temperature setting

A keypad lock helps prevent inadvertent changes the setting

Temperature deviation and over temperature could be amended in front panel directly

Heater is electrically cut-out if air temperature inside incubator exceed 40

The infant bed inclination angle is adjustable

Humidity is adjustable

Trough for pulling and pushing ,which is convenient to add the water and wash

Fan with low noise and long life-span

six operating windows,two side operating windows can be swiveled

Integral timer to record therapy time

Skin temperature sensor failure protect function avoid over temperature

cabinet with three drawers, silence castors

A second thermal cut-off function for more safety

Large size and double wall hood

Standard configuration

Main body(including the transparent hood,control system,infant bed,water trough),skin temperature sensor,I.V.pole, mattress, cabinet, castors

Optional parts: Phototherapy up side unit; phototherapy from up and down sides;RS232(485) connector ;Tray/pole

Technical data:

Power supply : 110/220V 60/50Hz

Power input : ≤420VA

Operating conditions:

Environment temperature: 20~30

Environment relative humidity: 30%~70%RH

Environment air velocity of flow: <0.3m/s

Air Temperature control range 25~38

Skin temperature control range:32~38.5

Skin temperature sensor accuracy: +0.3

Temperature fluctuation: +0.5

Uniformity of mattress temperature: ≤0.8

Warm-up time: ≤30min

Internal noise level: ≤48dB

Humidity display range:10%-95%RH

Humidity accuracy: ≤10%RH

Infant bed tilt angle : +10º

Mattress size: 67cm(L)*54cm(W)

Trough capacity: 1200ml

Air filter:0.5um

Package:

Each unit is packed in two wooden crate

Size (control unit and cabinet):123*69*106CM N.W.:85KG G.W.:125KG

Hood: 97*62*68CM N.W.:15KG G.W.:40KG

Transport and storage

Environment Temp:-10--+70

Environment Relative Humidity: ≤80%RH

Atmospheric Pressure: 500∼1060Hpa