Description:

Boron carbide bulletproof armor plate is made by sintereting boron carbide abrasive grain in the

high pressure vacuum sintering furnace, from room temperature to a certain temperature, keep this

temperature for several hours then naturally cooling to room temperature again, then processing it

mechanically to reach a required tolerance.

Applications:

Boron carbide bulletproof armor plate is suitable for making lightweight bulletproof armor, using to protect aircraft, vehicle, naval vessel and making bullet-proof vest.

Typical Chemical Analysis:

Total Boron 77.90%

Total Carbon 20.98%

Fe2O3 0.16%

B+C 98.88%

B4C 95.85%

Physical Properties:

Color Grey

Bending Strength 469Mpa

Fracture Toughness 4.2Mpa.m1/2

Density 2.52 g/cm3

Hardness 30.83Gpa, Vickers

Dimension Available :

size available upon request.

Normally packing way:

In carton box.

Other packing way upon request.

Key words:

boron carbide bulletproof vest armour, boron carbide body armor, b4c bullet proof vest, b4c bulletproof shield, b4c body amour, boron carbide hard armor plate, boron carbide ballistic vest, boron carbide bulletproof products, boron carbide military gods