we carry out thermal,mechanical design and then manufacture the entire ranges of turbine oil coolers suitable for turbines of any mw capacity manufactured by m/s bhel,triveni\bellis\siemens\alstom etc for their different capacities turbines.these coolers are manufacured as per the codes specified by the customer like tema rcb and asme codes.

the oil used in the system is of 56 grade.due to the lubrication provided by the turbine oil to the turbine the oil gets heated up,which is cooled by the hydralic oil cooler generally the turbine oil cooler is manufactured out of the carbon steel and copper/admiralty/cupro-nickel(90:10)/cupro-nickel(70:30)tubes depending upon the type of cooling water available.

we carry out thermal&mechanical design and manufacture turbine oil coolers according as per the clients requirements.
we carry out the manufacture of turbine oil coolers exactly as per the clients existing oil coolers.for the same we depute our technical representative to clients site,examine the turbine oil cooler and manufacture the new turbine oil coller exactly as per the existing ones.
wen also carry out the re=tubing of the turbine oil coolers on site and at our works too.re-tubing is done and is feasible in case of large mw turbines,only.