All

S-15-5 15W 5V 3A Single output switch power supply with CE ROHS for 2 years quality guarantee

Location:
Wenzhou, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Electronics & Electrical > Power Supplies

Product Description

S-15-5 15W 5V 3A Single output switch power supply with CE ROHS for 2 years quality guarantee / switching power supply / power supply

1.Features:

1)ac input range selectable by switch

2)input side chassis plug

3)protections:short circuit/overload/over voltage

4)forced air cooling by built-in DC FAN

5)PWM control and regulated

6)Built-in cooling fan ON-OFF control

7)100% full load burn-in test

8)Fixed switching frequency at 25KHZ

2.Technical Data:

Model
Specification		S-15-5S-15-12S-15-24
DC output voltage5V12V24V
Output voltage error(Note:2)

±2%

±1%±1%
Rated output current

3A

1.3A0.7A
Output current rage

0-3A

0-1.3A0-0.7A
Wave and noise(Note :3)50mVp-p50mVp-p100mVp-p
Inlet stability(Note :4)±0.5%±0.5%±0.5%
Load stablity (Note :5)±1%±0.5%±0.5%
DC output power15W15.6W16.8W
Efficiency65%68%72%
Adjustable range for DC voltage+10,-5%+10%+10%
AC input voltage range85-132VAC/170-264VACSelected by switch47-63Hz;240-370VDC
Input current0.5A/115V 0.25A/230A
AC INnrush current

Cold-start current15A/115V 30A/230V

Leakage current<0.5mA/240VAC
Overload proctection105%-150%Type:Foldback:current limiting reset:auto recovery
Over-voltage protection…………
High-temperature protection…………
Temperature coefficient±0.02%/°C(0-50°C)
Setup rise hold up time200ms,100ms,30ms
Vibration10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltageInput and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistanceInput and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity-20°C~+85°C.10%~95%RH
Overall dimension99×97×35mm
Weight0.3Kgs
Safety standardsMeet UL 1012 requirement(Not apply for the mark)
EMC standardsMeet FCC part15J Conduction classB
Note:
1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%.
3.Size:

4.S,D,T,Q,DC-DC,Din rail type all available

5.OEM,ODM

6.Main market: all the world wide

7. picture is as follow:



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Yueqing Winston Electric Co., Ltd.
Phone Number:
  0086-577-27852809
Fax Number:
 0086-577-27875159
 
Yueqing Winston Electric Co., Ltd.
 Zhejiang , China FREE
 

Resources