Chicken incubators / electronic layers / egg production device
1,materials "heat sponge plastics"
2,230VAC all eggs
3,low power
4,High rate of hatched

Specifications:

Semi-auto chicken egg incubator
1.Capacity for up to 48 eggs
2.semi-automatic turning

Semi-auto chicken egg incubator

This incubator was made according to the latest findings of the insulating material "thermal foam plastic” and is very economical in power consumption. With careful and proper operation, it’ll output a high survival rate and healthy chicks, to achieve the perfect (eggs) breeding.

Adjustable spacing can also be used for hatching, such as quail eggs, duck eggs and other species. Pan-line traction is available, to accommodate and maintain the water beneath the tank below.

The incubator space can hold 48 eggs or duck eggs hatch at the same time

Simple to use:

View temperature from Sensors Screen

Set temperature with the + / - buttons

Advantages:

1 Capacity for up to 48 eggs

2 The incubator is made of the insulating material "Thermal Plastic Foam”

3 semi-automatic turning

4 is equipped with three drip device

5 the contact can be easy on and off

6 Dimensions (L x W x H): 510 x 420 x 220 mm

7 Power of heating element: 46 Watt

8 Temperature adjustment range: 20.0 - 40.0 ° C

9 Cable length: 1.69 m

Facilities:

Housing made of thermal insulating foam plastic

Two large viewing window

Temperature control by electronic analog thermostat

Teflon-sheathed high-tech heating system, 46 watts

3 water troughs (for humidity control)

Wire grid (for the slip phase)

Semi-Automatic Turning Stake:

The semi-automatic turning insert is inserted into the bottom of the incubator on the wire rack and the cord (cord outside) through the eyelets in place. Put the eggs on the rods and mark a few eggs with a pencil on a page with an "X" on the opposite side with an "O".

Drag the end of the cord gently until the eggs have turned around 180 degrees, which you can see from the marker.

The next time you use pull cord on the opposite end. In this order, please contact the hatching eggs, if possible, however, 5 times a day.

After testing a good machine, waiting for 3 days, then put eggs in wire-line.