Triple Insulated Winding Wire (UL&SGS Approved)

Location:
Jinshan , Industrial Zone
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Triple Insulated Winding Wire (UL Approved) is made up of three insulation layers use the soldering heat-resistant polyester resin and polyamide resins which were developed by New Leaf.

Meets the safety standard certification: UL,TUV Rheinland.SGS test.

Certification: UL E243712

TUV Rheinlandol-lwc-15013879

Environmental Protection: RoHS

1.Production specification range: 0.16 ~ 1.20mm

2.Temperature class GPX-E (E Class 120 °C), GPX-B (B Class 130 °C);

3.Excellent withstand voltage characteristics, breakdown voltage is more than 15KV, access to

reinforced insulation (test voltage = 3000Vms, 1min) identification;

4.No need to peel the outer layer that can be soldered directly, Insulating layer developed by the our company's adoption the international leader in nanotechnology, with a direct modification of

solderability heat-resistant which is polyester resin and polyamide resin composition, Therefore, direct soldered does not occur such as the kind of fluorine resin insulating layer exposed copper

jacket shrinkage phenomenon, excellent solderability, solder temperature 410 ° C ≤ 3S;

5.Special wear resistance and surface smoothness, static friction coefficient≤ 0.133;

6.Good performance on resistant to chemical solvents and impregnating varnish Rating Voltage

Rated Voltage (Working Voltage) 1000Vrms, UL

7.In order to distinguish several groups different winding wire coils, our company can provide more colors triple insulated winding wire by needs of customers. The standard wire color is khaki, we have several colors as follows: red, green, blue, brown colors. There is no difference among the colors for using.For example, GPX-B is used for a20-wat class transformer and the conventional type. Because of saving the insulators and inner baffles, the transformer could be reduced by approximately half the volume and two-thirds of the weight. This could lead to both material and fabrication cost cuts. Significantly reduced leakage inductance and distributed capacitance and improving the high-frequency characteristics of the transformer.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Shanghai Xinyi Electrical Circuit Equipments Co., Ltd.
Phone Number:
  0086-021-67276900
Fax Number:
 0086-021-67276896