No.

Sort

Members

Descriptions

1

Measurement

length

custermized

Roof Single Span

custermized

Wall Single Span

custermized

Clear height

BFS can do 3 storeys buildings with light gauge framing system

Roof pitch

slope is 1:20(1.15°)~1:50(2.8°)

2

Specification

Roof

* 5:12 Roof slope; Roof truss at 24” (609 mm) O.C. connected to wall tracks

* R30 Fiberglass insulation in the roof truss cavity

* 1/2”(12mm) OSB board on top of the truss chord

* Waterproof attached to OSB board

* Mason tile, corrugated meatal tile, asphalt tile or terracotta tile shingle roofing (Standard)

* 1/2”(12mm)Gypsum board for inside ceiling

Exterior wall

* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation

* R13 Fiberglass Insulation in the wall stud cavity

* 1/2” (12 mm) OSB Board Covered On the Outside of the Stud Flange

* Breathing paper

* 5/16” (8mm) cement Siding on the Outside surface of the Exterior Wall

* Paint on the siding

* 1/2” (12mm) Gypsum Board on the Inside Surface

Interior Wall

* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation

* 5.5” (140 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. in bathrooms for plumbing system

* 1/2” (12mm) Gypsum board or waterproof Gypsum board on both Sides of the wall frames

* Normal interior door, c/w frame and casing

* Wall tiles in part of Bathroom and Kitchen

Floor

* 10” (250 mm) or 12”(300mm) Floor Joists spaced at 16” (406 mm) or 24” (609 mm) O.C

* 3/4” (18mm) OSB Board on floor joists

* 1/2” (12mm) Gypsum board for the ceiling

* Tiles in Bedrooms & living room.

* Tile flooring in Bathrooms and Kitchen

* MDF Baseboard

Kitchen

* Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)

* Brushed nickel handles & knobs on doors & drawers

* Granite countertops c/w backsplash

* Stainless sink c/w chromed goose neck faucet with sprayer

Bathroom

* 60” (1524 mm) Bath tub c/w chromed shower faucets

* Toilet 1.6 Gal. per flush

* Granite countertop vanity

* Lavatories c/w chromed faucets

* Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard)

Others

* Steel stairs included

* Plumbing and Electrical pipes (wires) systems excluded

Channel

Galvanized Steel Plain Sheet press molding Material: Q235. Painted

Applicatition

Span

Length

Roof

Single Span

1800mm

End Span

2100mm

Interval Span

2500mm

Cantilever without supporter

200mm

Cantilever with supporter

600mm

Wall

Single Span

2000mm

End Span

2400mm

Interval Span

2600mm

Cantilever

400mm