1. TECHNICAL DATA SHEET(1):

Note:

(1)All data above ware tested under standardized condition.

(2)All data listed in the chart were series; please refer to the related datasheet for special items.

(3)Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.

2. DESCRIPTION:

Jot66 is is a kind of coating made by pure polyurethane . It is applied on substrates, to form a firm, soft and seamless sealing film by chemical reaction with moisture in the air.Jot66 is manufactured in accordance with the GB/T19250-2003.

3. USES:

·Waterproofing for basement, kitchen, bathroom, underground tunnel, deep wells structure and normal decoration.

· Leak-proofing and penetrating-proofing of Reservoirs,water towers,swimming-pool,

Bath-pool,fountain pool,impounding reservoir,sewage cleaning pool and irrigation channel.

· Used for preventing of leaking,corrosion and penetrating for water tanks,underground

Pipeline.

· Bonding and moisture-proofing of various floor tiles,marble ,asbestos plank and so on.

4. ClEANING:

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

5. PACKAGING:

25kg/bucket

6. APPLICATION:

The substrate should be smooth, solid, clean, dry without sharp concave and convex points, honeycomb, pocking marks, peeling, free of bulges, greasy before application.it is better coating 3 times with scraper. When the first coat isn’t sticky, the second coat can be applied, the first layer is recommended being applied in thinner layer for better releasing gas generated during reaction. The second coat should be applied in different direction to the first coat. The optimal coating rate is 2.0kg/m² for thickness of 1.5mm.

7. ADVANTAGES:

* Pure polyurethane sealant,environment-friendly.

* Contains no asphalt, tar or any solvents, no harm to construction personnel.

* Free from pollution to the environment, No toxity after curing, No corrosion to base material,High solid content.

* One component, convenient for construction, No need of mixing,surplus products should be kept in good airproof package.

* Efficient:High strength and elasticity,resistant to acid and alkali,excellent bonding effect with concrete,tile and other substrates.

*Cost-effectice:the coating expands a little after curing,which means it turns a little bit thicker after curing.

* All items tested exceeds nation standard GB/T19250-2003.

8. ADVICE:

* Jot66 should be inverted in dry and shady indoor, avoid sunlight

and moisture.

* It is normally that a film formed on the surface of coating. It can be

used normally when removing the film.

* The rest coating should be sealed in order to avoid moisture.

* Pay attention to protect the waterproofing membrane during constructing

period and after finished.

* Warehouses and construction of the site is strictly prohibited fireworks