oil immersed type distribution transformer, Find complete details about transformer,distribution transformer,oil immersed transformer from ANDELI GROUP Co., LTD

Production introduction

Installation mode:indoor/outdoor type
Ambient temperature:-25oC~+40oC(outdoor) -5oC~+40oC(indoor)
Highest altitude:1000m
Installation site:in places without corrosive gases and obvious dusts.

Applicable standards
GB1094.1-2-1996 Power Transformer
GB1094.3;5-2003 Power transformer
GB/T6451-1999 Technical parameters and requirements for three-phase oil-immersed power transformer

Model designation

Performance characteristics
1.A multilayer cylinder structure is used for all high voltage windings in order to improve the voltage impulse distribution of windings.
2.For the capacity range of low voltage windings is from 30kVA to 2000kVA,the cylinder type or spiral structure is used to ensure the high mechanical strength,ampere lure distribution,and excellent short-circuits proof performance.
3.The securing structure is set in the transformer body,which is used for ensuring that no displacement will occur during the transportation;meanwhile,the turnbuckles are mounted in fasteners,which is for assuring that fasteners will not be loose during the long term operation.
4.Corrugated tanks are used in transformer for replacing the conservator.The tank enclosure and rim are completety sealed by welding or bolting up,which prolongs the service life of transformer oil.
5.The transformer surface are painted with primer and finish coats after derusting,and phosphorizing;which can meet the special operation requirements in metallurgic and petrochemical industries,as well as,in moist and dirty places.
6.The press relief valves,signal thermometers,and gas relays are equipped in the oil tank of hermetically sealed transformer in order to the standard requirements for safe operation.The transformers are attractive and competitive due to the compact shape,excellent design,and maintenance-free.

Notes for placing orders

Transformer type:rated capacity kVA
Number of phases:three-phase single-phase
High voltage: KV/Low voltage:KV
Frequency:50HZ 60HZ
Tapping range:±4×2.5% ±3×2.5% other
Connection group:Yyn0 Dyn11 othe
Impedance voltage:4% 6% other