1.Marble adhesive characteristics:Fast hardening, gel time 3~6 minutes at room femperature, after 120minutes the treated parts can be further proceeded;Can be treated in cold weather;Non hand sticky after cured;Good adhesion, working properties (grinding, milling, drilling), easilypolishable. 2.Application:Filling, patching, bonding and restoration of nature and cast stones,ceramics and porcelain tile. 3.Technical data:

Serialnumber	Item		Technical indexes
1	Pressing shear Stone	Standard	≥9Mpa
		Water immersion	≥6Mpa
		Heating	≥9Mpa
		Freeze-thaw	≥5Mpa
2	Dangerous substance Content	voc content	≤250g/L
		benzene	Not available
		Toluene & xylene	Not available
		formaldehyde	Not available

4.Direction:Add 1 to 3g of hardener to 100g of filler for filling, bonding andlaminating after mixing both components thoroughly. 5.Attention:Clean tools immediately after application, Clean with acetone ifnecessary;Safety rules of person protecion, wearing suitable gloves, glasses orscreen for face.and asure suitable local ventilation of work places;Rinse with water immeditaly in case of contact with eyes and skinsand appeal to doctor in serious case. 6.Storage and transportation:Shelf life is approximately one year if stored in a dry and cool placeits tightly closed original container;Non-dangerous goods, avaible fo various transporation. 7.Production standard:JC/T 989-2006 8.Management System:The products have passed the International authentication of theISO9001: 2000 "quality management system" and ISO14001: 2004"Environmental Management System". 9.Announcement:The above information is based on the latest stage of technical progressand merely take responsibility for this product . .It is to be considered asa non-binding hint and dose not release the user from a performance test,since application ,processing and environment influences are beyond our realm of control.