1.Characteristics:

Mixed epoxy resin, without formaldehyde, nontoxic;

Highly acidic and alkali resistances, ageing resistance;

Heat resistance, no creep deformation under room temperature;

Low moisture sensitivity and stable heavy duty.

2.Application:

Concrete, mansonry block, nature and artificial stone and other solid substrates.

3.Technical data:

4.Driection:

(1)Determination of achoring positon

(2)Determination of the thickness of steel bar

(3)check the size of aiguile and depth of drilling

(4)Drilling

(5)cleaning (blowing and brushing)

(6) Injection

(7)Screwing in concrete iron

(8)curing and tooling

(9)construction after completely cured

5.Attention:
Apply the eligible adhesive after inspection;
Clean the boring in processing, add sufficient adhesive in it;
With rotatory manipulation slowly in stead of insertion;
Detection of Anchoring effect by means of random checks, according
to the 1‰ of total volume to detect four from each group average. axial
tension test are used to determine the impact of load bearing capacity
of load orientation.
Safety rule in processing:
Keep away from the contact of children, do not put into mouth
Pesonal protection: Wearing suitable gloves, glasses or screen for face;
The adhesive and hardeners may cause chemical harms to skin and eyes.
Rinse with water immediately and call a specialized doctor in serious case.

6.Storage and transportation:
Shelf life is approximately one year under cool and dry condition in
the firmly closed original container;
Non-dangerous goods, avaible for various transporation.

7.Production standard:
JC 887-2001

8.Management System:
The products have passed the International authentication of the
ISO9001: 2000 "quality management system" and ISO14001: 2004
"Environmental Management System".?

10.Announcement:
The above information is based on the latest stage of technical progress
and merely take responsibility for this product . .It is to be considered as
a non-binding hint and dose not release the user from a performance test,
since application ,processing and environment influences are beyond our
realm of control.