High frequency 200mA x-ray unit medical equipment

Location:
Nanning, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Welcome to Nanning Yiju Medical Electronics Co., Ltd., which is one of the biggest manufacturers for

medical x-ray machine in China, we are specializing in research and development and production of

high frequency X-ray generator, high frequency x-ray machine, etc. This is our company building:

This is our team:

Our production room of high frequency x-ray generator:

High frequency x-ray generator measurement and inspection:

We not only provide the products, but also the best service(including technology, etc.):

We have enough ability to train any engineers about our machine, even though the engineers

come from different countries, we still provide our technical training freely, to guarantee every partner

can share our technology, and can handle installation and after sales service, we will treasure every

partner and provide the best servic to keep the partnership for long time.

We will train every engineer who comes from our partner side or we send engineers to partner

company, we sincerely hope any requirement you need or any idea you have, just please don't

hesitate to tell us, we will support and cooperate well.

Real pictures were taken

Item

Technology Parameter

Generator

Supplier: Yiju; Model: YJG20R-A

Inversion frequency ≥30kHz

Exposure kVp: 1 KVp/ Step; 40-125 KVp

Exposure mA: 16-200mA

Exposure Time: 0.0025-6.4sec

Power: 20kW

Power: Voltage: 3 phase, 380V

X-ray tube

Supplier: Yiju; Model: YJG20R-A

Focus: 1/2mm

Voltage: 125kV

Current: 200mA

Heat Capacity: 140KHU

Power: 20/40kW

Radiographic table

Film distance: 500 mm ~1255mm

Stand

Tube vertical moving range: 770mm±10mm

Tube horizontal moving range:≥1300mm

Tube rotating around horizontal support: ±90°

Tube rotating around stand:±180°,locked at each 90°

Table

Table size: L2000mm×W760mm×H690mm

Vertical moving range: ≥900mm

Horizontal moving range: ≥220mm

Gird

(14"×17")

r=10:1; f=110cm; N=40Line/cm

Collimator

With positioning light

Introduction:

Why we choose HF X-ray generator to use with X-ray machine?

Base on the clinical use for a long term, to prove that the high frequency X-ray machine has the following characteristics:

1.The output waveform of high frequency X-ray machine is approximate constant dc, pulse rate is very low, scattering ray is very less, reduce patient skin dose greatly, use little X-ray can get nice images, so reduce the damage to the patient and operator.

2.High imaging quality, high frequency X-ray machine can produce X-ray equably, wiring harness is stable, little scattering ray, imaging is very clear.

3.Output X-ray stably and with good repeatability, high quality X-ray, if in the same exposure time, the effective X-ray of 300mA high frequency X-ray machine is similar to 500mA power frequency X-ray machine, so reduce the radiation intensity and damage greatly for the patients and operators.

4.DR is very convenient to use in clinical and emergency room, doctor can read the image and make diagnosis in a very short time at any time at anywhere. Improve the working efficiency greatly and save the labor. Improve the hospital diagnostic ability and make the hospital famous.

5.Reduce to using X-ray film to reduce the cost, and share the X-ray image via the internet, so can realize the real digital X-ray age, improve the accuracy of clinical diagnosis.

More information please contact me, I will reply you in the shortest time, thank you very much for your cooperation. Best regards.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Nanning Yiju Medical Electronics Co., Ltd.
Phone Number:
  86-771-4515356
Fax Number:
 86-771-4818585