4E1 optical fiber multiplexer, 4/8/16E1 + 100M Ethernet

Location:
Hangzhou, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

4E1 optical fiber Multiplexer with 100M Ethernet

Product function
The OPTIMUX is part of Multi E1 and Fast Ethernet transmission system family, used to build a 150Mb/s optical point-to-point link. Based on an ASIC chip; it performs the transportation of 4/8/16 E1 and a fast Ethernet at full speed. It also provides an order-wire and an auxiliary UART interface for Management. The OPTIMUX offers a highly integrated solution for the perfect function, stable performance and convenience with low power consumption.

Features
Merges the Ethernet and time-division multiplex (TDM) transmission to the same pipe.
Provides 4/8/16 E1 and 100Mb/s Fast Ethernet interface.
The standard E1 interfaces comply with ITU-T G.703, G.823 and G.742.
Supports either auto-negotiation or hardware configuration selection of the Ethernet operation. The Ethernet interface supports VLAN and Flow Control function.
Real-time Monitoring and all necessary alarm display for easy management.
Supports Local and Remote Loop-back Test.
Uses standard telephone set as order-wire.
Provides one transparent RS232 interface for user data links.
Provides RS232 interface for Network Management.
Extends the fiber link up to 120 km without any repeater.
Compact single board Terminal.
100~220V Ac and -48VDC power supply is optional.

E1 interface
Interface Rate: 2.048Mbps+-50PPM
Coding: HDB3
Interface signal coding: ITU-T G.703
E1 Impedance : BNC 75Ω(unbalance),RJ45 120Ω(balance)
Interface character: match G.703
Jitter tolerance : match G.742 and G.823.

10/100 Base-T interface
4*ETH interface, accord with IEEE802.3,802.3u, default configure is auto-negotiation.
Interface Rate: 10/100Mbps
Connector: RJ45

Optical interface
Interface: FC/SC
Wavelenth: 850nm/1310nm multi-mode, 1310nm/1550nm single mode.
Transmit distance: 2 Km for multi-mode, 40 Km/60Km/120Km for single mode.

Power Supply:
Range of input voltage: DC-48V(-36V ~-72V); AC220V(100V ~240V)

Power consumption: 5W

Environmental Conditions:
Operating Temperature Range: 0 to +45
Humidity: 95%, no condensation

Mechanics
Length Height Width (Depth): 483mm×44.45mm×200mm
Weight: 2.5kg






This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Winyuan Technology Co., Ltd.
Phone Number:
  86-571-87913029
Fax Number:
 86-571-88074976