Product Description

NO DIFFICULT PRODUCTS TO TEST IN THE WORLD!

Ignition Parts Shape TestCMM MQ-654

Brief Introduction:

A manual 3d coordinate measuring machine designed for high-accuracy, low-cost and easy operation. Suitable for a wide range of applications from simple orthogonal dimensioning to complex form measurement. Smooth operation due to high-precision air bearings and lightweight moving members. Continuous fine feed is provided over the entire measuring range.

A. Machine

MQ-564-Three Coordinate Measuring Machine (CMM)

- High performance granite fixed worktable and all three axes are made in TAIWAN.

- RENISHAW0.5um RENISHAW scale and readhead,Resolution: 0.5um

- Pneumatic system made

- Synchronous belt drive system

- Pricision filter

- Full screen and high soft cable towline

B. Computer System

CORE2 2.6GHz/1G RAM/160GBHard Disk/128MB Graphic Card/19″LCD Color Monitor/ Windows'XP

HP OR EPSON Color DeskJet printer

C. Software System

(1) ACDMIS(DCC) Software Package with(for Windows XP)

(2) Chinese / English

Probe System

(1) Renishaw MH20i probe with TP20 scanning probe system for England

(2) Renishaw Probe Styli Kitfor England

Features:

CMM-564 combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.

Design Characteristic

- Granite fixed worktable, all three axes are made of high performance granite, good temperature characteristic, have the same coefficient of thermal expansion.

- Granite worktable with integral “dovetail” guide in X axis, eliminate the pitch and yaw ,also provides superior motion stability.

- Z axis air-balance with self-protection ,improve motion capability.

- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.

- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped

- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes movement..

- RENISHAW steel scale

- Famous parts from all over the world are used in every important sub systems

Specifications:

Measuring Strokes : 500x600 x400(mm)

Max part weight : 500 kg

Renishaw ENGLAND Resolution : 0.5(mm)

Accuracy according GB/T16857.2-1997 equal ISO 10 360:

(Volumetric length measuring error) U3 =2.6+ L/250[mm]

(Volumetric Probing Error) 3 mm

Room required specifications

- Average room temperature: 20 - 22 °C

- Maximum thermal gradients:1 °C/hour,2 °C/day,1 °C/m,

- Air supply system

- (Min. air pressure) : 0.8 MPa

- (Min. air consumption) : 0.4 m3/min

- Electrical requirements

- (Voltage) : 220 Vac ± 10%

- (Frequency) : 50 Hz-60 Hz

- (Current) : 15 A

Allowed Maximum Floor Vibration

- (Frequency Range): 0 ~ 19 Hz 19~75 Hz > 75 Hz

- (Maximum Amplitude): 0.0011 mm 0.0011~0.002 mm 0.002 mm

Computer System

CORE2 2.6 GHz, 1GB Ram, 160GB Hard Disk

128MB Graphic Card, DVD-Rom

Key Board & Mouse

19² LCD Color Monitor

Windows XP O.S. and AC-DMIS MEASURING SOFTWARE

Applied Industries:

Packaging & Shipping

Our Services

Guarantee:

12 months warranty. Purchase it with confidence & joy!

1.Within 12 months from the date of assembly and acceptance, but not exceeding 15 months from the date of shipment. During this period, we will use phone and internet to provide the users with a comprehensive after-sale advisory service.

2. We provide life-long warranty services of machine for users with cost.

1) If machine failure caused by our side, you can send back the spare parts to us with cost by our side.

2) If our technician or engineer invited to customer side for training, all technical service is free, except ticket and accommodation.

3. Extra warranty period: We will call user with after-sales advisory service.

4. Our corporation has spare parts that can be provided for the users with cost.

5. We provide users with after-sales value-added technical service by preferential price for life, such as technical upgrades and retrofit.

Company Information

About us:

Customers:

FAQ

What kind of products can the machine measure?

Good question!

Our Coordinate measuring machines are universal ones,

can be applied to many fields:

1)Machinery: sheet, mould & die, gear, turning parts like bearings ,shaft;

2)Electronics: phone& tablet sheet, PCB, watch parts, etc;

3)Plastics: mobile phone camera plate, cover, front bezel, slide plate, etc;

4)Others: nail, bolt, nut, spacer, drill bit, fillets,etc.