Flat EL Light Meter , with each gauge pointer also an individual light source, entered production on 1960 Chrysler and Imperial passenger cars, and was continued successfully on several Chrysler vehicles through 1967.

EL Panel are frequently used as backlights to liquid crystal displays. They readily provide a gentle, even illumination to the entire display while consuming relatively little electric power. This makes them convenient for battery-operated devices such as automotive instrument panel, pagers, wristwatches, computer, gifts etc -controlled thermostats and their gentle green-cyan glow is a common sight in the technological world. They do, however, require relatively high voltage (best between 90 and 120 volts). For battery-operated devices, this voltage must be generated by a converter circuit within the device. Electroluminescent lights operate in this fashion. Brightness per unit area increases with increased voltage and frequency.

Accessories: Inverter/Driver/Converter

Inverter/Driver Input Voltage: 12VDC

Operating Current (100vrms/800Hz): 3~5 A /sq m

Power: 30-50W/sq m

Brightness(100vrm/800Hz): Above 60cd /sq m

Operating Temperature: -30°C~50°C(Nor.)/ 80°C(Max)

Storage Temperature: -30°C~70°C

Operating Humidity: 0%~90%

Bend Radius: 0.25"-Normal 2nd Generation Foil-Foldable

Normal Edge Seal: 0.08" (2mm)

Min. Edge Seal: 0.04" (1mm)

Lead Pulling: 0.5kg 10sec.

Soldering Heat Resistance: 250°C 3sec>3mm distance from EL panel with extra force applied.

Half Lifetime: 5,000hours or more depending on the display's environment, driving condition and duty cycle.

Others: wide viewing angle

Disclaimer: The commodities demonstrated the color can with material object some chromatic aberrations, the color all take attain the material object as. It can be customized to made to meet your exact specifications. We assures that we will give you our best price for high quality products! It is your wise choose to cooperate with us on the basis of equality and mutual benefit!