One-componment polyurethane wood floor adhesive

Location:
Dongguan, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

One-componment polyurethane wood floor adhesive

1. TECHNICAL DATA SHEET


Testing Items

Performance

Density(g/cm3)

1.35±0.1

Solid content(%)

≥96

Tensile Strength(Mpa)

≥1.4

Shore A-hardness(A°)

40±5

Elongation at break(%)

≥600

Shrinkage(%)

≤5

Tack free time(min)

≤90

Extrudability (ml/min)

≥120

Curing speed(mm/24h)

3~5

Pollution properties

Non

Application temperature(°C)

+5~+35

Shelf life(month)

9

Note

All data above ware tested under standardized condition.

All data listed in the chart were series; please refer to the related datasheet for special items.

Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing

2. DESCRIPTION

One-componment polyurethane wood adhesive is specially designed for direct elastic

bonding of wood floors.It is wildly used because of the the excellent perforrmanece and convencient for application.

3. USES

·Bonds many types of wooden parquet, strip and sheet wood flooring systems to concrete, wood or over existing floors.

·Good for bonding wood and wood derivative and paper

4. ClEANING

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned. it is recommended that ground floor slabs be used with surface treatment agent if excessive moisture is present in the concrete.

5.PACKAGING

* 600ml sausage, 20kg/bulk.

6.APPLICATION

Minimum application temperature: 5°C.

Remove lid off pail and cut open foil liner. Once opened, the entire contents of the pail should be used within a short period of time.Apply firm pressure when bringing components together and keep the joint under pressure for at least 3 hours until the adhesive has partially cured

7.ADVANTAGES

• Excellent elasticity.

• One-componment,moisture cured,convenience of application.

• No solvent,no smell and odour after curing,environment-friendly,

• No corrosion to substrates.

• Excellent sound dampening qualities.

• good bonding quality.

• Reduce reflection and noise.

8.ADVICE

* For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.

* Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.

* This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious;



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Dongguan Pustar Adhesives & Sealants Co., Ltd.
Phone Number:
  86-0769-15322878819
Fax Number:
 86-0769-82010651