Suspension Digital X-Ray Radiography System (CCD-DR)

1.Main Uses

For the body and the body of digital chest X-ray examination, head, abdomen, spine, pelvis, limbs and other body radiography diagnosis (including DICOM3.0 printing).

2.Main Configuration

(1).Generator

CPI (made in Canada) High Frequency High Voltage Generator;
Power:32KW/50KW;
Frequency:100KHZ;
Photography (MAS): 0.1~500mAs;0.1~630mAs
Photography (KV):40~150KV.

Generator

(2).X-Ray Tube

1).VARIAN RAD-14 Tube (made in U.S.A);
Focus:0. 6/1.2MM;
Photography (KV): 40~150KV;
Heat Capacity: 300KHU.

2).Toshiba E7242X Tube (made in Japan);
Focus: 0. 6/1.5MM;
Photography (KV): 40~125KV;
Heat Capacity: 200KHU.

3).Toshiba E7843X Tube (made in Japan);
Focus: 0. 6/1.2MM;
Photography (KV): 40~150KV;
Heat Capacity: 150KHU.

(3).Detector

KODAK CsI CCD image detector;
Ultra big caliber lens, greatly reduce projection dose;
Intelligence digital image capture & processing technique, doctors only need press hand brake down to finish;
Import Csl blinking screen, image clear and sharp-sighted, no other non-Csl products can compare with it.
Semi-conductor refrigeration, safe and reliable;
High-speed image transmission technique, transmission time is less than 2 seconds;
Sensor automatically reparation technique, assure of image long-term stable and no dot defect, no distortion;
Ultra service life, theoretically there is no life limit.

CCD Detector

(4).Detector Performance Parameter

Image Size: 15 x 17 or 17 x 17 inch;
Imaging Time: ≤ 10 S;
A/D Conversion: 16 bit/65535 degree;
Image pixels ≥ 9 Megapixel;
Limiting resolution≥3.4 LP/MM.

(5).AEC Automatic Exposure system

AEC is a solid state ionization chamber, build of special developed, cost effective material,intended to measure the dose of X-Ray used in real time operation within the Medical Radiology,Oncology and Chiropractors.

Features:
· Invisibility;
· Little absorption;
· Highly efficient;
· Scatter free;
· Mechanically stable;
· Very reliable;
· User friendly.

Solid Ionization Chamber

(6)Dell Image Capture & Processing Workstation

Dell work station:Core Duo 2.0GHz, 2GB RAM, Hard disk 500GB, 19 inch LED (1 set), 100M network interface, DICOM3.0 interface.

Dell image capture & processing workstation

(8).Automatic Exposure Image- Capture Software System

ZKML automatic exposure image-capture software really realizes the automatic operation of exposure capture image. Doctors only need to press hand brake down and then all the exposure terms are automatically finished, which greatly reduces doctors’ workload, improves work efficiency and assures of the consistency of image quality.

Main Functions:
Patient registration, image capture, cutting, negative image, image turning over, rotation, zooming, labeling, translating , display, image window width and window level adjustment, DICOM image sending, DICOM film printing, Worklist function and statistics inquiry.

(9).Shelf

Motor-driven Suspension Photography Shelf.

(10).Table Specifications

Length: 200cm (±3 CM);
Width: 65cm (±3 CM);
Height: 70cm (±3 CM).

(11).Image Capture and Processing Software

1) Manual /automatic window width / window level, preset window width / window level, positive and negative image turning, image turning, image rotation, image amplification and roaming, labeling and measuring, splitting, automatic electron cutting, part amplification, recovering original image.

2) Image Processing Technique:
·Dynamic scope optimization technique:Compressing dynamic carve of original images automatically to reach habitual image features of doctors for diagnosis conveniently;

·High frequency image enhancement technique:Enhancing image contrast, improve detail resolution, obviously improve high frequency image quality of bone trabecula etc. The display of details appears more perfectly;

·Noise suppression technique automatically:Filtering mixed frequency signals, obviously reduce image noise, improve image contrast, therefore, improve image quality;

·Edge enhancement technique: Making image clearer.

(12).Other Parts

JPI stationary grid, (made in Korea);
RS collimator (made in Korea);
High speed data transmission cable.

(13).Image Printing Function

Manually selecting the target image for printing;
Different printing devices, film format and printing pages available;
DICOME3.0:

·Print SCU;
·Worklist SCU;
·Storage SCU;
·QR SCU;
·MPPS SCU.