Cabinet Heat Exchanger

Scope:

Be widely developed for telecom cabinet,battery cabinet,electric cabinet and industry control cabinet,etc.

Working Principle:

Cabinet heat exchanger is a device that utilizes the natural cool resources to exchange heat between hot inside and cool outside of cabinet with limited power consumption.

When there is large temperature difference,the device will effectively exchange heat between hot inside and cool outside through aisle from multilayer and fins,which make the cabinet be an enclosed system with temperature control,and equipment inside can work normally.

Features:

1.Compact structure of plate heat exchanger.

2.Main components are CE certified,meet EU RoHS requirements.

3.Using natural cooling technologies,energy-saving operation,more reliable and lower cost than air conditioner.

4.Be euipped with enclosed air circuit cooling system,effectively avoid contamination from outside.

5.High voltage test and power test to guarantee all products are 100% qualitified.

6.Digital and precise temperature control.

7.Completely solve dust and moisture contamination issues caused by ventilation.

8.Avoid dew formation from too cold.

9.Convenient installation and maintenance.

Technique Data Sheet:

Installation Picture:

Remark:The oblique lines represent removed part,all installation holes of cabinet heat exchanger series are 6mm.

Security Alert:

1.Install under direction of the manufacturer's instruction.Improper installation may cause water leakage,electric shock,fire,so that accidents happen.

2.Don't use the equipment in more dust,oil moisture,corrosive or harsh air environment.The ambient temperature should not exceed 55°C and not low than 0°C,humidity should not exceed 95%.

3.When handle or move the equipment,don't upside down,tilt and collision.

4.Voltage,frequency,temperaure and cooling capacity must meet the requirements of the corresponding cabinet plate heat exchanger.

5.When an exception occurs,such as smoke,abnormal noise,power should be cut off immediately and ask maintenance techincains to repair.Don't repair by yourself.

6.Please disconnect power to avoid electric shock when clean,demolite or repair the equipment.

More details,contact us!