Mini alarm with infrared sensor and 2 remote controls

Description:

1.This alarm adopts special infrared processing integrated circuit and automatic temperature compensation technology.

2. Infrared alarm system can be used to detect the movement to against the intruder in the room or house,when the system triggered ,It will sound 105db and the alarm sound lasts 30 seconds.

3. Within 20 seconds alarm signal is not detected, you must leave within 20 seconds the detection area of electronic dog.

4.Have the low false alarm rate, high reliability, high cost performance characteristics, suitable for home, office, garden, and street stores and other places with anti-theft or intruder.

Installation requirements:

1.Becasue of the highest sensitivity of the lens in the body lateral movement,and the vertical motion sensitivity poor, so in the installation,you should pay attention to the angle between the horizontal and height detectors, which has a great impact on the protected area.

2. When you install, avoiding the heat source, such as hot and cold air outlet, air vent, heater, air cooler, etc.

3. The scope of protection should be able to look directly, cannot have obstacles. So avoid the straight on the doors and windows.

4.The alarm into the wall should be 10 to 30 degree angle with the longest detection distance,So adjust the angle as your actual installation.

Installation:

1. This alarm should be fixed in the wall of 2-2.5m

2. Put 4pcs AA battery

3. Turn the alarm and adjust the angle

Technical parameters:

About our superiority:

We can design and produce various patterns as per customers' requirements. If you are interested in our products or want to know more , PLS feel free to contact us at any time or visit our website www.luckarm.com Looking forward to your enquiry.