Hot-Dipped Galvanized

Our standard process is to galvanize to the ASTM A53

requirements.

Surface and End Finishes

Surface Finishes: black, passivate, galvanized,

uncoated, pickled and oiled, pickled, bare and

soluble oil.

End Finishes: plain ends, roll groove, cut groove,

threaded and coupled, and threads only (one or

both ends).

Choose From a Full Line of Standard Pipe

ASTM A53 is used for mechanical and low pressure

applications and in ordinary uses in steam, water, gas

and air lines. It can be formed and welded.

Tensile Requirements

Tensile Strength, min. 60, 000 psi

Yield Strength, min. 35,000 psi

Bending Test (Cold)

For NPS 2 and under

Degree of Bend 90º

Diameter of Mandrel 12 x outside pipe diameter