All

Inversor,Pure sine wave inverter charger 6000w peak power 18000w

Location:
shenzhenChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Electronics & Electrical > Power Supplies

Product Description

Durable construction for long life under extreme environmental conditions .
Low idle current (less than 1 watt) conserves energy when no loads are present .
Soft start capability for starting heavy loads.
Built-in starting control circuits for two- and three-wire generator starting systems.
Simplified controls with a snap-on cover that protects settings from being accidentally changed .
Better thermal performance allows full output power to 50°C (122°F) without de-rating .
High surge capacity starts more difficult loads and handles overload conditions reliably .
Durable powder coated, corrosion resistant steel chassis.
70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance.
New power factor corrected (PFC) charging, combined with a more sophisticated multi-stage battery charging algorithm,reduces electricity draw and generator run-time .
Pure copper transformer inside and pure copper DC terminal port outside.
Copper transformer,low consumption and heat-resisting,improves work efficiency.
Big charge current:30-70A,suitable for long power failure area.

Rated Capacity1000w1500w2000w3000w

1.Input

Model120v Models230v Models
Nominal Voltage100V/110V/115V/120V Selectable200V/220V/230V/240V Selectable
Input FrequencyNominal Input Frequency 50Hz/ 60Hz (Auto Detection)
Low Line Frequency Re-Connect :58+0.3Hz For 60Hz;
48+0.3Hz For 50Hz;
Low Line Frequency Disconnect :57+0.3Hz For 60Hz;
47+0.3Hz For 50Hz;
High Line Frequency Re-Connect: 64+0.3Hz For 60Hz;
54+0.3Hz For 50Hz;
High Line Frequency Disconnect: 65+0.3Hz For 60Hz;
55+0.3Hz For 50Hz;
Efficiency >95% (Normal Mode)
Noise FilteringFull Time EMI/RFI Filtering
Over Current Protection By Re-Settable Over Current Protector
Voltage Range
Nominal Input Voltage230Vac( Selectable)
Low Line Disconnect184Vac±4%
Low Line Re-Connect194Vac ±4%
High Line Disconnect265Vac±4%
High Line Re-Connect255Vac±4%
Max AC Input Voltage270VRMS

2.Output

Rated Power1000W1500W2000W3000W
Output Voltage100V/110V/115V/120V Selectable200V/220V/230V/240V Selectable
Voltage WaveformPure Sine Wave
Crest Factor3:1
Output FrequencyNominal Input Frequency 50Hz/ 60Hz (Auto Detection)
Low Line Frequency Re-Connect :
58+0.3Hz For 60Hz;48+0.3Hz For 50Hz;
Low Line Frequency Disconnect :
57+0.3Hz For 60Hz;47+0.3Hz For 50Hz;
High Line Frequency Re-Connect:
64+0.3Hz For 60Hz;54+0.3Hz For 50Hz;
High Line Frequency Disconnect:
65+0.3Hz For 60Hz;55+0.3Hz For 50Hz;
Regulation(Nominal)±10% Typical Of Nominal Voltage
Transfer TimeTransfer Time : AC To DC : 10ms (Typical)
Transfer Time : DC To AC : 10ms(Typical )
Max Bypass
Overload Current 		30A

3.Input

Nominal VoltageDC12V/24VDC12V/24VDC12V/24VDC24V/48V
Efficiency >80%
Noise FilteringFull Time EMI/RFI Filtering
Over Current Protection By Re-Settable Over Current Protector
Voltage Range
Min DC Start Voltage10V/20V/40V
Low Battery Alarm10.5Vdc ± 0.3Vdc
For 12V Battery;
21.0Vdc ± 0.6Vdc
For 24V Battery;
42.0Vdc ± 0.6Vdc
For 48V Battery
Low DC Input
Shut-Down		10.0Vdc ± 0.3Vdc
For 12V Battery
20.0vdc± 0.6Vdc
For 24V Battery;
40.0Vdc± 0.6Vdc
For 48V Battery
High DC Input
Alarm& Fault		16Vdc ± 0.3Vdc
For 12V Battery;
32Vdc ± 0.6Vdc
For 24V Battery;
64Vdc ± 0.6Vdc
For 48V Battery
High DC Input
Recovery		15.5Vdc ± 0.3Vdc
For 12V Battery;
31.0Vdc ± 0.6Vdc
For 24V Battery;
62.0Vdc ± 0.6Vdc
For 48V Battery
Surge Protection(110%<Load<125%) ±10%:
Fault (Shutdown Output) After 15 Minutes;
(125%<Load<150%) ±10%:
Fault (Shutdown Output) After 60s;
Load>150% ±10%:
Fault (Shutdown Output) After 20s
2000VA / 2700VA:440 Joules 324 Joules
4000VA / 5000VA:660 Joules

4.Output

Rated Power1000W1500W2000W3000W
Output Voltage100V/110V/115V/120V
Selectable		200V/220V/230V/240V
Selectable
Voltage WaveformPure Sine Wave
Crest Factor3:1
Output Frequency
Nominal Input Frequency50Hz ± 0.3Hz
Auto Tracking Main
Frequency(Hz)		50Hz @48-54Hz ;
60Hz @58-64Hz
Regulation(Nominal)±10% Typical Of Nominal Voltage
Regulation
(Battery Mode) 		Output Voltage Regulation ±10% Rms
Transfer TimeTransfer Time : AC To DC : 10ms (Typical)
Transfer Time: AC To DC : 10ms (Typical )
Max Bypass
Overload Current 		30A
Nominal Input Voltage230Vac
Input Voltage Range 196~243Vac
Nominal Output Voltage According To The Battery Type
Nominal Charge Current 35amp-70amp
Charge Current
Regulation		± 5Adc
Battery Initial Voltage0 –15.7 V Dc (Can Operate With 0V Battery)
Charger Short
Circuit Protection		Circuit Breaker
Over Charge
Protection		Bat. V ≥ 15.7Vdc/31.4Vdc,
Beeps 0.5s Every 1s & Fault After 60s
Battery Type Lead-Acid 12Ah ~ 250Ah
Voltage 0 –15.7 V DC (Can Operate With 0V Battery)
Typical Backup TimeNo Limit,Depend on external battery
Charging MethodSmart Pulse Charging With Two Charging Modes
Quick Charging When Battery Is Not Fully Charged,
Trickle Charging When Battery Is 90% Fully Charged.
Average Charging Current35A/20A45A/30A65A/35A75A/30A
Protection Over Current Protection (SCR Control)
Over Charging Voltage Protection (SCR Control)
Thermal Protection (CPU Control)

5.Communications & Management

Control PanelLCD/LED Option
Audible AlarmAlarm On Battery:Low Battery & Battery Over Voltage
Alarm On Abnormal Operation:
Over Load, Short-Circuit, & Over Heat
Cooling Fan ControlTemperature Fan,Forced Air, Variable Speed Fan

6.Environment And Safe

Operating
Temperature 		0°C To 40°C
Transit/Storage
Temperature 		-15°C To 60°C
Relative Humidity5 - 95% Non Condensing
Operating Altitude0 ~ 3000 Meters
Audible Noise 60 Dba Max at 1m
Safety MarkingsCE.FCC
EMC Class B, EN50091-2, FCC Part15, IEC1000-2-2
Isolation 1.5kvac For 1 Minute Between Battery And AC Side
Quality Control System ISO 9001



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Shenzhen Must Power Limited
Phone Number:
  86-755-29109533
Fax Number:
 86-755-29022690
 
 

Resources