Strong Points of MICHEL Tyre Sealant

---------------------------------------------------------------------------------------

Michel Sealant For Tyre (Puncture Repair Prevention Tyre Sealant) designed to quickly seek-out and effectively seal most normal punctures and slow leaks.

1. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles.

2.No jack nor tyre-undo is needed.

3.One step procedure of tyre bumping and repairing is finished in seconds.

4.It can also be filled into new tyres to prevent unexpected leakage.

5.Non-toxic and odorless.

6.No corrosion and no damage to the tire.

Sizes Avaliable:

------------------------------------------------------------------------------------------------------

350ml*48pcs/ctn;

400ml*48pcs/ctn

500ml*24pcs/ctn;

1000ml*24pcs/ctn.

Used Volume:

---------------------------------------------------------------------------------------------------

125ml-250ml for one repair of bicycle tyre;

350ml-400ml for one repair of motorcycle tyre;

500ml-1000ml for one repair of normal car tyre.

DIRECTIONS FOR USE

-------------------------------------------------------------------------------------

1. Open the valve of tyre, fill this Tyre Sealant into the tyre.
2. Close the valve of tyre, and turn the tyre running for a few minutes.
3. Pump the tyre. Slowly drive 1-2km, and the punctures will be automatically bonded.
4. 125ml-250ml for bicycles; 200ml-350ml for motorcycles; 500ml-1000ml for small size cars; 1000ml-2000ml for big cars.
5. When driving, if find insufficient air in tyre, re-pump the tyre.