Model features:

Multi-layers structure( for example, three to ten layers), full use of space, multiply parking spaces and greatly save room.Integrated with high performance motor electrical technology, lift and slide parking system can improve the efficiency of vehicle access.It adopts lower energy consumption solution, all electrical parts are energy saving, can use motor with 0.2KW the lowest for sliding, and 2.2KW motor for lifting, due to this, it does not have much demand on power supply, household voltage can be used.The motor uses the updated frequency reduction design so that the minimum working can reach the maximum application and immensely improve use life and effectiveness.Sunshade and rain-proof ceilings can be added, the top and side can be used as advertising board.See below table for specific parameter.

Serial No.	Specification	Technical parameter
1	Required height for first layer	1950mm
2	Required height for rest layers	1700mm
3	Designed width	1850mm
4	Turn channel	6000mm
5	Parking layer	According to general need
6	Capacity for each layer	2000KG
7	Standard voltage	380V/50HZ
8	Lifting motor power	2.2KW
9	Sliding motor power	0.2KW
10	Vehicle access time	55 seconds(five layers)
11	Safety device 1	Fall protection
12	Safety device 2	Emergency stop
13	Safety device 3	Overrun device
14	Safety device 4	Photoelectric detection induction
15	Control mode	Manual button, IC card, computer