Standard Specifications:

Three powerde rollsportable control panelSafety devicesPLC system for side rollsComplaiance with CE norms regulationsCone Bending DeviceOptional Accessories:Hardened rollsAdjustable turning speedgrounded rollsExtendde rollsAdjustable hydraulic upportsNC control system

Rolling machine with 3 rollers
Type	Max thickness of plate(mm)	Max.Width of plate(mm)	Plate Yield limit(MPa)	Coiling speed(M/min)	Min.dia of plate in full load(mm)	Dia.of upper roller(mm)	Dia.of low roller(mm)	Centre dist of two low rollers(mm)	Main motor power(kw)	Machine weight(t)	Dimension(L×W×H)(mm)
W11-6×1500	6	1500	265	7.16	380	180	160	210	5.5	2.6	3310×1210×1330
W11-6×2000	6	2000	265	7.16	380	180	160	210	5.5	3.1	3810×1210×1330
W11-6×2500	6	2500	265	7.16	500	190	170	260	7.5	4.6	4310×1210×1330
W11-6×3200	6	3200	265	6.46	500	240	200	310	11	7.2	5200×1400×1200
W11-8×2000	8	2000	265	7.16	450	190	170	260	7.5	4.1	3810×1210×1330
W11-8×2500	8	2500	265	6.46	500	240	200	310	11	6.7	4500×1420×1610
W11-12×2000	12	2000	265	6.46	500	240	200	310	11	6.7	4050×1420×1610
W11-12×2500	12	2500	265	5	750	260	220	330	15	6.3	5000×1500×1300
W11-12×3000	12	3000	265	5	650	280	240	360	22	12.1	5500×1500×1300
W11-16×2000	16	2000	265	5	750	260	220	330	15	5.8	4500×1500×1300
W11-16×2500	16	2500	265	5	750	280	240	360	22	8.5	5000×1500×1300
W11-16×3200	16	3200	265	5	900	340	280	440	30	15.6	6300×1600×1900
W11-20×2000	20	2000	265	5	750	280	240	360	22	7.8	4500×1500×1300
W11-20×2500	20	2500	265	5	850	340	280	440	30	14.7	5600×1600×1900
W11-25×2000	25	2000	265	5	850	340	280	440	30	13.2	5100×1600×1900
W11-25×2500	25	2500	265	4.5	900	380	300	490	37	24.7	6700×4600×2150
W11-30×2000	30	2000	265	4.5	900	380	300	490	37	23	5500×1460×2150
W11-30×2500	30	2500	265	4.34	1100	460	380	600	45	25	6900×2300×2800
W11-30×3000	30	3000	265	5	1200	480	400	600	45	32	7400×2300×2600
W11-30×3200	30	3200	265	5	1200	500	400	600	45	35.2	7600×2300×2600
W11-40×2000	40	2000	265	5	1200	480	400	600	45	28.7	6400×2300×2800
W11-40×2500	40	2500	265	5	1400	500	400	600	45	34.2	6900×2300×2800
W11-40×3000	40	3000	265	4.37	1600	500	425	650	60	36	8000×1980×2250
W11-50×3000	50	3000	265	4	2000	600	480	700	75	71.5	9900×3100×3500
W11-60×3000	60	3000	265	4	2000	700	560	800	90

The machine adopts 3-roller symmetrical structure with the upper roller moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw, the two lower rollers rotates, and provides the plate materials with torque through the engagement of the output gear of the moderator with the gear of the lower rollers. The disadvantage of the machine is that the ends of the plate materials need to have the help from other equipment for per-bending.

Fnction of machine

1. The upper roller can move vertically SA well as horizontally. It has double function of re-bending and rounding.

2. The upper roller is in drum-type. And support roller is added to the lower roller. Through regulation of the support roller, it can coil high precision products to the exten of thin-thinck plates.

3. Realize pre-bending and cone bending function.

4. Perfect pre-bending and cone bending function.