Automatic filling machine

1.Filling Material: It is suitable for less than 20pa.s material of viscosity and rigidity

2. Filling range: up to 1000ml (Acceptance custom-made).

3.Filling error:±0.5~1%;

4.Quality: Within one year after delivery. The seller will provide free service against defects from normal use.

5.Material:SUS304/316.

6. Filling mode: dive to container

7.Operation: PLC control and touch-screen.

8.Filling mouth: anti-drip special filling mouth 12mm.

9. Capacity: 500ml speed: 30-40pcs/min (parameter test is available from below factor: testing medium on 25.C shampoo, filling speed adjust to maximum, the speed of conveyor belt is 12m/min,working pressure is 6.5kg/cm2),

Influence Capacity factor: bottle shape,filling volume,material feature,filling accuracy,variation of temperature.

10. Feature: Photoelectric and high-low level transducer detection material and bottles,no bottle no filling,counting bottle function ,PLC controlling.

11. Control Discharging material:encoder collect data and pass to PLC which is control filling mouth motion.

12. Feed control: feed material unit is control by high-low transducer and feed pump ; Feed pump provide for oneself(6~8m3/h rotor pump).

13. Control signal output: Feed pump is controled by low voltage differential signaling.

14. power: 220V,50HZ,1.50 KW .

15. Air supply: working pressure≥6.5kg/cm2,air consumption≥0.3m3/min.

QUARANTEE:

ADVANTAGE:

CE: