E waste management ,waste electronic recycling machine ,electronics waste recycling plant

Statement :

with the development of technology and society, the updating of electronic products has become more and more frequent .But with is phenomenon ,more and more e waste has grown .What is more ,those kind of e waste exert a bad impact on people' health and environment . So ,according to demands ,our company developed and reaserched PCB recycling equipment to process those e waste.

Brief introduction of e waste recycling plant / waste electronic recycling machine :

E waste recycling plant adopts a new process that makes raw material such as printed circuit boards ,waste computer boards to be the mixture of metal and resin fiber powder by crushing and pulverzing ,then separates metal from plastic by high voltage electrostatic separator ,the metal separating rate is up to 98%. Meanwhile ,to avoid the pollution problem ,it also equipped with impulse dust collector .this kind of dust removal is updated products and teh effects is batter than triple dust collector . All the indexes is accordance with environment requirements .

Main features of e waste recycling plant / waste electronic recycling machine :

1.New process that integrates different breaking and crushing ,so as to achieve the maximum effect and high separation rate .

2. It adopts impulse dust removal ,so there is no any pollution in the whole production line .

3.The unit consumption is lower ,and the biggest treatment is up to 1ton per hour .

4.it features high capacity ,stable performance ,low comsumption .

5.This machine is automatically operating ,and just needs 2 opertors in the whole production line

Working Flow Diagram of e waste recycling plant / waste electronic recycling machine :

crusher→pulverizer→ classifier →separator

Through the secondary mechanical pieces, and make PCB as a metal and nonmetal mixed

powder, again by the air separation technology, or electrostatic separation technology, the metal

and nonmetal powder can be completely separated and collected. Dust caused in the production

process can be used carbon adsorption removal or closed ring room, dust, or simple bag dust

removal, the whole process in a production line to realize, fully enclosed operation,the

production of won't produce any pollution. Recoveryof copper and fiber glass all can be used

again.

Main parts of e waste recycling plant / waste electronic recycling machine :

Pre-crusher : it used for crushing waste circuit boards into 20-60mesh

Analyzer: it used to analyzing the fineness of powder :

Vibrating classifier : used for classifying the crushed raw material .

High voltage electrostatic separator : it used for separating metal from non-metal .

Our certificate :