I : Water softener – capacity: 10m3/hour

1.1 Equipment specification and technical target a. Spec: Φ900×1800mm

b. Material: FRP

c. Filter material: 001×7 Resin 1200kg.

d. Operational modes: 174/440 multi-way valve automatically work, and regenerate.

1.2 Installment operation

1.2.1 Pours 1/3 water into the jar, fill filters

1.2.2 Operation explain

First operation: Positive resin is already regenerated before leaving factory, after filling in material, take 172/440 multitandem valve red wheel point to

START place to cross points slightly, execution instead washes 5 minutes then to use. The normal operation turns on the V15 valve.

Suggestion uses semiautomatic instead washes regeneration way, execution instead washes regeneration only to take 172/440 multitandem valve red wheel point to START place to cross points slightly, the multitandem valve then automatic execution instead washes regenerates one time, time about 75-90 minutes. Each time the regeneration needs industry salt least 50kg.

Picture:


Salt tank :

Resin:

II CHL Pressure Pump CHL16 -30

Application

CHL(T) type pump are mainly used in industrial field:
Air-conditioning system
Cooling system
Industrial cleaning
Water treatment(Water purification)
Aquiculture
Fertilizing / metering system
Environmental application
Other special applications
Applicable medium
Thin and clean non-flammable and non-explosive liquid without solid granules and fibers.
Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
When the density or viscosity of to-be-conveyed liquid is larger than that of water, it is necessary to select a driving motor of high-power.
Whether a specific liquid is suitable for the pump depends on many factors, among which the most important ones are chlorine content, PH value,temperature, solvent and oil content.
Operation condition
Liquid temperature:
Normal temperature type: -15°C~+70°C
Hot water type: +70°C~+110°C
Highest ambient temperature: +40°C
Max.operation pressure :10 bar
Max.inlet pressure is limited by max.operation pressure
Pump
Horizontal multistage non-self-priming centifugal pump, attached with long shaft electric motor.
Compact structure renders small size of pump;axial inlet and radial outlet.

-- View technical --